~curtischang/CB_IMGPSScan.git

			@@ -14,7 +14,7 @@
			ExtCtrls, ComCtrls, Menus, StdCtrls, Gauges, EnImgScr, PJMenuSpeedButtons,
			Buttons, ImgList, SBSimpleSSL, SBHTTPSClient, SBWinCertStorage, SBX509,
			SBCustomCertStorage, SBUtils,mpsBarco,BarcodesFinder,HTTPApp,ErrList,
			Xmltool,inifiles,printers,IdHashMessageDigest, idHash;
			Xmltool,inifiles,printers,IdHashMessageDigest, idHash, LogFile;

			var
			Ch_WriteNote : Boolean;
			@@ -256,6 +256,8 @@
			N2: TMenuItem;
			ISB1: TImageScrollBox;
			Label3: TLabel;
			LogFile1: TLogFile;
			ScanGrayCB: TCheckBox;
			procedure ActiveFormCreate(Sender: TObject);
			procedure Panel9Resize(Sender: TObject);
			procedure ISB1Click(Sender: TObject);
			@@ -371,6 +373,9 @@
			procedure ImageScrollBox1NewGraphic(const Graphic: TDibGraphic);
			procedure SmoothCBClick(Sender: TObject);
			procedure N1Click(Sender: TObject);
			procedure TreeView1MouseEnter(Sender: TObject);
			procedure ScrollBox1MouseEnter(Sender: TObject);
			procedure ScanGrayCBClick(Sender: TObject);
			private
			{ Private declarations }
			HotKeyId1,HotKeyId2,HotKeyId3,HotKeyId4 :Integer;
			@@ -407,6 +412,7 @@
			FImgDelete:string; // Y/N 有權限可在補件時刪除影像
			FIsExternal:string;//Y/N
			FCheck_main_form:string; //Y/N
			FWH_category:string; //Y/N Y是歸類時有區分入庫非入庫文件 N 是不區分
			////////傳入參數///////

			//******Http參數******
			@@ -487,6 +493,7 @@
			LastAddFormidList:TstringList;
			SampleFormIDList:TStringList; //20170627 已存在範本的formid
			ExistImgList:TStringList; //20170724 已經存在的影像list for ESCAN //Img的完整路徑
			reSizeExistImgList:TstringList; //20171012被縮放的舊圖MD5存入
			//******清單區******

			//******顯示區******
			@@ -561,6 +568,8 @@
			NowDivPageFormID:String;

			FirstDocDir : String;
			FMaxUploadSize:String;// 上傳zip大小限制
			FJpgCompression:integer;// 20171211 jpg to tif 的壓縮率

			Draging : Boolean;

			@@ -838,7 +847,12 @@
			function LoadFileGetMD5(const filename:string):string; //20170809 取的檔案的MD5
			function ISExistImg(const filename:string):boolean; //20170809 確認是否存在原有影像
			procedure _DelTreeForExistImg(ASourceDir:String); //2017 刪除前確認有舊影像嗎
			function DocNoIsExistImg(DocNopath: String): boolean; //2017 刪除前確認有舊影像嗎
			function DocNoIsExistImg(DocNopath: String): boolean; //2017 刪除前確認有舊影像嗎
			function CheckCaseAttach_OK: Boolean;
			function DeleteDocNoFileForESCAN(Path, DocNo: String): Boolean; //2017 確認是否有未歸類文件
			function CheckRequiredColumnValues(workno,caseno:String) :Boolean; //20171003 此大類下此案是否檢核必填
			function logTimeString :String;
			procedure ReduceLogFile ;
			protected
			{ Protected declarations }
			procedure DefinePropertyPages(DefinePropertyPage: TDefinePropertyPage); override;
			@@ -958,6 +972,8 @@
			function Get_isExternal: WideString; safecall;
			procedure Set_check_main_form(const Value: WideString); safecall;
			procedure Set_isExternal(const Value: WideString); safecall;
			function Get_WH_CATEGORY: WideString; safecall;
			procedure Set_WH_CATEGORY(const Value: WideString); safecall;
			public
			{ Public declarations }
			procedure Initialize; override;
			@@ -1014,32 +1030,89 @@
			end;

			procedure TCB_IMGPSScanX.WMMOUSEWHEEL(var message: TWMMouseWheel);
			var
			I: Integer;
			iISB : TImageScrollBox;
			begin
			inherited;
			//lb1.Caption:=IntToStr(message.Keys);
			if (message.WheelDelta = WHEEL_DELTA) Then
			begin

			if (message.WheelDelta = WHEEL_DELTA) Then begin
			if Edit1.Focused then
			begin
			ScrollBox1.VertScrollBar.Increment := 50;
			ScrollBox1.Perform(WM_VSCROLL, SB_LINEUP, 0);
			end
			else if DisplayISB.Focused then
			begin
			DisplayISB.VertScrollBar.Increment := 50;
			DisplayISB.Perform(WM_VSCROLL, SB_LINEUP, 0);
			end;
			end else if (message.WheelDelta = -WHEEL_DELTA) then begin
			if Edit1.Focused then
			begin
			ScrollBox1.VertScrollBar.Increment := 50;
			ScrollBox1.Perform(WM_VSCROLL, SB_LINEDOWN, 0);
			end
			else if DisplayISB.Focused then
			begin
			DisplayISB.VertScrollBar.Increment := 50;
			DisplayISB.Perform(WM_VSCROLL, SB_LINEDOWN, 0);
			end;
			if ScrollBox1.Focused then
			begin
			ScrollBox1.VertScrollBar.Increment := 50;
			ScrollBox1.Perform(WM_VSCROLL,SB_Lineup,0);
			end;
			if DisplayISB <> nil then
			begin
			if (DisplayISB.Focused) and (message.Keys=0) then
			begin
			DisplayISB.VertScrollBar.Increment := 50;
			DisplayISB.Perform(WM_VSCROLL,SB_Lineup,0);
			end;

			if (DisplayISB.Focused) and (message.Keys=50) then
			begin
			DisplayISB.ZoomMode := zmPercent;
			if DisplayISB.ZoomPercent < 90 then
			DisplayISB.ZoomPercent := DisplayISB.ZoomPercent+10;
			end;

			end;
			i:=0;
			while FindComponent(ISBName+inttostr(i)) <> nil do
			begin
			iISB := TImageScrollBox(FindComponent(ISBName+inttostr(i)));
			if iISB.Focused then
			begin
			ScrollBox1.VertScrollBar.Increment := 50;
			ScrollBox1.Perform(WM_VSCROLL,SB_Lineup,0);
			end;
			inc(i);
			end;

			end
			else if (message.WheelDelta = -WHEEL_DELTA) then
			begin

			if ScrollBox1.Focused then
			begin
			ScrollBox1.VertScrollBar.Increment := 50;
			ScrollBox1.Perform(WM_VSCROLL, SB_LINEDOWN, 0);
			end;
			if DisplayISB <> nil then
			begin
			if (DisplayISB.Focused) and (message.Keys=0) then
			begin
			DisplayISB.VertScrollBar.Increment := 50;
			DisplayISB.Perform(WM_VSCROLL,SB_LINEDOWN,0);
			end;
			if (DisplayISB.Focused) and (message.Keys=50) then
			begin
			DisplayISB.ZoomMode := zmPercent;
			if DisplayISB.ZoomPercent > 10 then
			DisplayISB.ZoomPercent := DisplayISB.ZoomPercent-10;
			end;


			end;

			i:=0;
			while FindComponent(ISBName+inttostr(i)) <> nil do
			begin
			iISB := TImageScrollBox(FindComponent(ISBName+inttostr(i)));
			if iISB.Focused then
			begin
			ScrollBox1.VertScrollBar.Increment := 50;
			ScrollBox1.Perform(WM_VSCROLL,SB_Lineup,0);
			end;
			inc(i);
			end;

			end;


			end;

			procedure TCB_IMGPSScanX.WNoteBtnClick(Sender: TObject);
			@@ -1213,53 +1286,24 @@
			ST1,ST2,ST3,ST4:TStringList;
			i,j,k:Integer;
			begin
			//ShowMessage('casepath='+casepath);

			ST1:=TStringList.Create;
			ST2:=TStringList.Create;
			ST3:=TStringList.Create;

			//FImgDelete:='Y';
			{if FileExists(casepath+'CaseDocNo.dat') then
			begin
			ST1.LoadFromFile(casepath+'CaseDocNo.dat');
			for I := 0 to ST1.Count - 1 do
			begin
			ST2.LoadFromFile(casepath+ST1.Strings[i]+'\Context.dat');
			for j := 0 to ST2.Count - 1 do
			begin
			ExistImgList.Add(casepath+ST1.Strings[i]+'\'+ST2.Strings[j])
			end;
			end;
			end;

			if FileExists(casepath+'S_Attach\Context.dat') then
			begin
			ST3.LoadFromFile(casepath+'S_Attach\Context.dat');
			for I := 0 to ST3.Count - 1 do
			begin
			ExistImgList.Add(casepath+'S_Attach\'+ST3.Strings[i])
			end;
			end;

			if FileExists(casepath+'Attach\Context.dat') then
			begin
			ST3.LoadFromFile(casepath+'Attach\Context.dat');
			for I := 0 to ST3.Count - 1 do
			begin
			ExistImgList.Add(casepath+'Attach\'+ST3.Strings[i])
			end;
			end; }
			ExistImgList.Clear;
			ST1.LoadFromFile(casepath+'Download\Context.dat');
			for I := 0 to ST1.Count - 1 do
			begin
			LogFile1.LogToFile(logTimeString+casepath+'Download\'+ST1.Strings[i]+',MD5='+LoadFileGetMD5(casepath+'Download\'+ST1.Strings[i]));
			ExistImgList.Add(LoadFileGetMD5(casepath+'Download\'+ST1.Strings[i])) ;
			end;
			LogFile1.LogToFile(logTimeString+'ExistImgList.text'+ExistImgList.CommaText);

			ST1.Free;
			ST2.Free;
			ST3.Free;
			//ShowMessage('ExistImgList='+ExistImgList.Text);

			end;

			procedure TCB_IMGPSScanX.Initialize;
			@@ -1303,6 +1347,7 @@
			NowPage := p+1;
			PageLV.ItemIndex := P;
			end;
			//DisplayISB.SetFocus;
			end;

			procedure TCB_IMGPSScanX.ISB1EndScroll(Sender: TObject);
			@@ -1322,7 +1367,7 @@

			procedure TCB_IMGPSScanX.ISB1Enter(Sender: TObject);
			begin
			//ISB1.SetFocus;
			ISB1.SetFocus;
			end;

			procedure TCB_IMGPSScanX.ISB1ImageMouseDown(Sender: TObject; Button: TMouseButton;
			@@ -1331,7 +1376,8 @@
			p : Integer;
			begin
			DisplayISB := TImageScrollBox(Sender);
			//DisplayISB.SetFocus;
			if NowClick<>0 then
			DisplayISB.SetFocus;
			Shape1.Left := TPanel(TImageScrollBox(Sender).Parent).Left - Seg;
			Shape1.Top := TPanel(TImageScrollBox(Sender).Parent).Top - Seg;
			P := strtoint(copy(DisplayISB.Name,4,1)) + ScrollBar1.Position-2;
			@@ -1366,17 +1412,25 @@
			begin
			//Edit1.SetFocus;
			//TImageScrollBox(Sender).SetFocus;

			if TImageScrollBox(Sender).FileName = '' then
			begin
			//ShowMessage('AAA');
			Label3.Caption:='FileName='+TImageScrollBox(Sender).FileName+' time='+FormatDateTime('yyyy/mm/dd HH:MM:SS', now);
			TImageScrollBox(Sender).MouseMode := mmUser
			end
			Else
			begin
			Label3.Caption:='FileName='+TImageScrollBox(Sender).FileName;
			ViewMouseMode(NowClick);
			end;

			ISB1.AlwaysShowAnnotations := False;

			// if TImageScrollBox(Sender).FileName = '' then
			// begin
			////ShowMessage('AAA');
			//Label3.Caption:='FileName='+TImageScrollBox(Sender).FileName+' time='+FormatDateTime('yyyy/mm/dd HH:MM:SS', now);
			// TImageScrollBox(Sender).MouseMode := mmUser
			// end
			// Else
			// begin
			//Label3.Caption:='FileName='+TImageScrollBox(Sender).FileName;
			// ViewMouseMode(NowClick);
			// end;
			end;

			procedure TCB_IMGPSScanX.ISB1ImageMouseUp(Sender: TObject; Button: TMouseButton;
			@@ -1633,7 +1687,14 @@
			LastAddFormidList.Free;
			SampleFormIDList.Free;
			ExistImgList.Free;
			reSizeExistImgList.Free;
			//******清單區******
			if (FMode = 'DSCAN') or (FMode = 'ESCAN') then //重掃件及異動件要只能掃指定編號的件
			begin
			if ImagePath<>'' then
			_Deltree(ImagePath);
			end;

			if FEvents <> nil then FEvents.OnDestroy;
			end;

			@@ -1961,8 +2022,10 @@
			iISB : TImageScrollBox;
			GoAtt : Boolean;
			AttLv : Integer;
			ST1 :TStringList;
			begin
			PreNode2Name := '';
			ST1:=TStringList.Create;
			if TreeView1.Selected.Parent = MyTreeNode1 then
			PreNode2Name:= GetNode2Name(MyTreeNode2);
			ShowText := _Msg('文件歸類中,請稍候');
			@@ -1977,12 +2040,13 @@
			try
			InitialLanguage(DocListForm); //載入多國語言
			//InitialLanguage(PatchDlg); //載入多國語言
			DocListForm.CheckBox1.Visible:=False;
			for i := 1 to FORM_INF_List.Count - 1 do
			begin
			FormID := GetSQLData(FORM_INF_List,'T1.FORM_ID',i);
			FormName := GetSQLData(FORM_INF_List,'T1.FORM_DESC',i);
			DocNo := GetSQLData(FORM_INF_List,'T1.DOC_NO',i)+GetSQLData(FORM_INF_List,'T1.DOC_VERSION',i);
			if not FormIDAppear(FormID) then Continue;
			if not FormIDAppear(FormID) then Continue; //20170816 先秀全部

			//Showmessage(FORM_INF_List.Text);
			//showmessage(inttostr(FORM_INF_List.Count)+#13+inttostr(self.Doc_Inf_List.Count));
			@@ -2002,23 +2066,48 @@
			begin
			if (Components[i] is TShape) and (copy(Components[i].Name,1,2)='SP') then
			begin
			//Showmessage(Components[i].Name);
			iISBName := ShapeName2PreViewISBName(TShape(Components[i]));
			iISB := TImageScrollBox(FindComponent(iISBName));
			OldName := ExtractFileName(iISB.FileName);
			Ext := ExtractFileExt(OldName);
			FormID := DocListForm.DocLV.Selected.Caption;
			DocNo := FormCode2DocNo(FormID);

			if DocListForm.CheckBox1.Checked then
			begin
			FormID := DocListForm.Edit1.Text;
			DocNo := GetNewCustomDocNo(DisplayPath,FormID);
			end
			else
			begin
			FormID := DocListForm.DocLV.Selected.Caption;
			DocNo := FormCode2DocNo(FormID);
			end;


			if DocNoDir2DocNo(Path2DocDir(ExtractFilePath(iISB.FileName),NowCaseno)) = DocNo then
			DocDir := Path2DocDir(ExtractFilePath(iISB.FileName),NowCaseNo)
			Else
			DocDir := FindLastestDocDir(NowCaseno,DocNo);


			//ShowMessage('DocNoNeedDiv(DocNo)='+BoolToStr(DocNoNeedDiv(DocNo),true));
			//ShowMessage('DocDir='+DocDir);
			if DocNoNeedDiv(DocNo) then //要分份數
			begin
			if ((FormCode2Page(FormID) = '01') and (GetDocDir_Page(NowCaseno,DocDir)>0)) or (DocDir = '') then
			begin
			DocDir := DocNo2DocNoDir(ImageSavePath + NowCaseno+'\',DocNo);
			end
			else
			begin //20171016 真對補件影響所加的判斷
			ST1.Clear;
			if FileExists(ImageSavePath + NowCaseno+'\'+DocDir+'\Context.dat') then
			begin
			ST1.LoadFromFile(ImageSavePath + NowCaseno+'\'+DocDir+'\Context.dat');
			if ISExistImg(ImageSavePath + NowCaseno+'\'+DocDir+'\'+ST1.Strings[0]) then
			begin
			DocDir := DocNo2DocNoDir(ImageSavePath + NowCaseno+'\',DocNo);
			end;
			end;
			end;
			end
			Else //不分份數
			begin
			@@ -2052,6 +2141,7 @@
			//ReNameContext(iISB.FileName,OldName,NewName);
			end;
			end;
			//ShowMessage('KKKK');
			ReSortFileName(ExtractFilePath(iISB.FileName));
			DrawDocItem2(MytreeNode1,NowCaseno);
			ClearErrini(NowCaseno,MyTreeNode1); //清掉檢核記錄
			@@ -2066,6 +2156,7 @@
			finally
			DataLoading(False,False);
			DocListForm.Free;
			ST1.Free;
			end;

			end;
			@@ -2188,18 +2279,19 @@
			iISB := TImageScrollBox(FindComponent(iISBName));
			//ShowMessage('iISB.FileName='+iISB.FileName);
			//ShowMessage(ExtractFilePath(iISB.FileName)+','+ExtractFileName(iISB.FileName)+','+NowCaseNo);
			if (FMode = 'ESCAN') and (FModeName<>'異動件') then
			begin
			if ISExistImg(iISB.FileName) then
			begin
			ShowMessage(_Msg('此圖為非當次掃瞄，不可刪除'));
			Exit;
			end;
			end;
			// if (FMode = 'ESCAN') and (FModeName<>'異動件') then
			// begin
			// if ISExistImg(iISB.FileName) then
			// begin
			// ShowMessage(_Msg('此圖為非當次掃瞄，不可刪除'));
			// Exit;
			// end;
			// end;

			DeleteImageFile(ExtractFilePath(iISB.FileName),ExtractFileName(iISB.FileName),NowCaseNo);
			end;
			end;
			//ShowMessage('iISB.FileName='+iISB.FileName);
			ReSortFileName(ExtractFilePath(iISB.FileName));
			DrawDocItem2(MytreeNode1,NowCaseno);
			MyTreeNode1.Text := Format('%s-%d'+_Msg('頁'),[NowCaseno,GetCasePage(ImageSavePath,NowCaseNo)]);
			@@ -2424,17 +2516,12 @@
			begin
			if TreeView1.Selected = NewTreeNode then //全刪 //新掃描件
			begin
			if (FMode = 'ESCAN') then
			begin
			ShowMessage(_Msg('補件不可刪除全案影像'));
			Exit;
			end;

			If Messagedlg(_Msg('是否刪除所有案件?'),mtconfirmation,[mbyes,mbcancel],0) = mrcancel then Exit;
			clearView(1);
			Application.ProcessMessages;
			_DelTree(ImageSavePath);
			if (FMode = 'ESCAN') and (FModeName<>'異動件') then
			if (FMode = 'ESCAN') then
			begin
			MkDir(ImageSavePath+FCaseID);
			CreateEmptyCase(ImageSavePath,FCaseID);
			@@ -2444,11 +2531,7 @@
			end
			Else if TreeView1.Selected = MyTreeNode1 then //案件編號
			begin
			if (FMode = 'ESCAN') and (FModeName<>'異動件') then
			begin
			ShowMessage(_Msg('補件不可刪除全案影像'));
			Exit;
			end;

			If Messagedlg(Format(_Msg('編號(%s)是否刪除?'),[NowCaseno]),mtconfirmation,[mbyes,mbcancel],0) = mrcancel then Exit;
			clearView(1);
			Application.ProcessMessages;
			@@ -2493,18 +2576,19 @@
			If Messagedlg(Format(_Msg('文件(%s)是否刪除?'),[DocNo2DocName(NowCaseno,NowDocNo)]),mtconfirmation,[mbyes,mbcancel],0) = mrcancel then Exit;
			ClearView(1);
			Application.ProcessMessages;
			if (FMode = 'ESCAN') and (FModeName<>'異動件') then
			//ShowMessage(NowDocDir);
			if (Length(NowDocDir)=8) or (NowDocDir=AttName) then
			begin
			if not DocNoIsExistImg(ImageSavePath+NowCaseno+'\'+NowDocDir+'\') then
			begin
			ShowMessage(_Msg('有圖為非當次掃瞄，不可刪除'));
			Exit;
			end;
			//ShowMessage('DeleteDocNoFileForESCAN');
			DeleteDocNoFileForESCAN(ImageSavePath+NowCaseno+'\'+NowDocDir,NowDocDir);
			end
			else
			begin
			_DelTree(ImageSavePath+NowCaseno+'\'+NowDocDir);
			SetDocNoList('D',-1,NowCaseNo,NowDocDir,'');
			end;

			_DelTree(ImageSavePath+NowCaseno+'\'+NowDocDir);
			SetUseCase('D',ImageSavePath+NowCaseno+'\',NowDocDir,'','');
			SetDocNoList('D',-1,NowCaseNo,NowDocDir,'');

			if (Copy(NowDocNo,1,5)='ZZZZZ') then //20140703 刪除自定文件時要刪ini檔資料
			DeleteCustomDocDir(ImageSavePath+NowCaseno+'\',NowDocDir);

			@@ -2517,7 +2601,6 @@
			Else if TreeView1.Selected = MyTreeNode3 then //FormID層
			begin
			If Messagedlg(Format(_Msg('文件(%s)是否刪除?'),[NowFormName]),mtconfirmation,[mbyes,mbcancel],0) = mrcancel then Exit;


			DeleteFormCodeFile(NowCaseNo,NowDocDir,NowFormCode);
			SetRecordEditedDocDir('A',NowCaseNo,NowDocDir);
			@@ -2637,195 +2720,357 @@
			end;
			end;

			procedure TCB_IMGPSScanX.PM104Click(Sender: TObject);
			var
			i,n,m,ii,P,v,v1,page,imageCount : Integer;
			FName : String;
			CaseID,DocNo,FormID :String;
			DocDir :String;
			SavePath,SaveFilename:String;
			ISB : TImageScrollBox;
			FileRec:TSearchrec;
			begin

			Procedure TCB_IMGPSScanX.PM104Click(Sender: TObject);
			Var
			i, n, m, ii, P, v, v1, page, imageCount: Integer;
			FName: String;
			CaseID, DocNo, FormID: String;
			DocDir: String;
			SavePath, SaveFilename: String;
			ISB: TImageScrollBox;
			FileRec: TSearchrec;

			iGraphic, iGraphic_First, iGraphic_sec: TTiffGraphic;
			iRect : TRect;
			JpgGr : TJpegGraphic;
			SaveStream : TFileStream;
			SaveStreamA:TFileStream;
			SaveStreamB:TFileStream;
			cooom:integer;
			Begin
			OpenDialog1.Filter := 'Image files\|.TIF;.JPG';
			if OpenDialog1.Execute then
			begin
			If OpenDialog1.Execute Then
			Begin
			ISB := TImageScrollBox.Create(self);
			try
			ShowText :=_Msg('檔案加入中,請稍候');
			DataLoading(True,True);
			if TreeView1.Selected = nil then Exit;
			FName := OpenDialog1.FileName;
			try
			ShowText := _Msg('檔案加入中,請稍候');
			DataLoading(True, True);
			If TreeView1.Selected = Nil Then
			Exit;
			FName := OpenDialog1.FileName;

			FindFirst(FName,faAnyfile,FileRec);
			//ShowMessage(IntToStr(FILEREC.Size)+','+IntToStr(FFileSizeLimit));
			if FFileSizeLimit=0 then
			begin
			FFileSizeLimit:=5*1024;
			end;
			if FILEREC.Size > FFileSizeLimit*1024 then //檢查檔案大小
			begin
			ShowMessage(Format('%.3f',[FILEREC.Size / 1024])+' KB, file size over limit.');
			FindClose(FILEREC);
			DataLoading(false,false);
			exit;
			end;
			FindFirst(FName, faAnyfile, FileRec);

			FindClose(FILEREC);
			CaseID := NowCaseno ;
			imageCount := 0;
			P := ISB.ImageCountFromFile(OpenDialog1.FileName);
			for I := 1 to P do
			If FFileSizeLimit = 0 Then
			Begin
			FFileSizeLimit := 5 * 1024;
			End;
			//FFileSizeLimit:=2051024;
			//ShowMessage(IntToStr(FileRec.Size)+','+IntToStr(FFileSizeLimit * 1024));
			If FileRec.Size > FFileSizeLimit * 1024 Then // 檢查檔案大小
			Begin
			ShowMessage(Format('目前檔案大小為 %.3f MB', [FileRec.Size / (1024*1024)]) +
			'，已超過單一檔案匯入限制'+Format('%.1f',[FFileSizeLimit/1024])+'MB');
			FindClose(FileRec);
			DataLoading(false, false);
			Exit;
			End;
			//MessageDlg()
			//cooom:=StrToInt(InputBox('輸入百分比','輸入百分比',''));
			cooom:=FJpgCompression;//20171211彩色tif採jpg壓縮的比例

			FindClose(FileRec);
			CaseID := NowCaseno;
			imageCount := 0;
			P := ISB.ImageCountFromFile(OpenDialog1.FileName);
			For i := 1 To P Do
			Begin
			ShowText := _Msg('檔案加入中,請稍候(' + inttostr(i) + '/' + inttostr(P) + ')');
			DataLoading(True, True);
			ISB.LoadFromFile(FName, i);
			DeskewImg(ISB.Graphic);


			ISB_BW.Graphic.Assign(ISB.Graphic); //20180104
			If ISB.Graphic.ImageFormat <> ifBlackWhite Then //20180104
			begin
			ShowText :=_Msg('檔案加入中,請稍候('+inttostr(i)+'/'+inttostr(P)+')');
			DataLoading(True,True);
			ISB.LoadFromFile(FName,i);
			//ISB.SaveToFile('C:\OCX\aaaaaa'+IntToStr(i)+'.tif');
			DeskewImg(ISB.Graphic);
			//ISB.SaveToFile('C:\OCX\bbbbbb'+IntToStr(i)+'.tif');
			if (TreeView1.Selected = NewTreeNode) or (TreeView1.Selected = MyTreeNode1) then
			begin
			ConvertToBW(ISB_BW.Graphic);
			end;
			///ISB_BW.SaveToFile('KKKKKKKK.tif');

			iGraphic_First := TTiffGraphic.Create;
			iGraphic_sec := TTiffGraphic.Create;

			iGraphic_First.Assign(ISB.Graphic);
			//ShowMessage(IntToStr(iGraphic_First.Palette.palNumEntries)); //彩色會為0 黑白為2

			MpsGetBarcode(ISB_BW.Graphic, MpsBarcodeinf); //判斷A3 有用FormID 所以要先辨條碼
			//有必要的話先把影像轉正再開始切圖
			If CheckNeedCrop(iGraphic_First) Then
			Begin
			// 先取右邊的影像
			iRect.Left := ISB.Graphic.Width Div 2;
			iRect.Right := ISB.Graphic.Width;
			iRect.Top := 0;
			iRect.Bottom := ISB.Graphic.Height;
			CropImg(iGraphic_First, iRect);

			iGraphic_sec.Assign(ISB.Graphic);
			// 再取左邊的影像
			iRect.Left := 0;
			iRect.Right := ISB.Graphic.Width Div 2;
			iRect.Top := 0;
			iRect.Bottom := ISB.Graphic.Height;
			CropImg(iGraphic_sec, iRect);
			End;

			iGraphic := iGraphic_First;

			While Not iGraphic.IsEmpty Do
			Begin
			If (TreeView1.Selected = NewTreeNode) Or
			(TreeView1.Selected = MyTreeNode1) Then
			Begin
			SaveFilename := '';
			MpsGetBarcode(ISB.Graphic,MpsBarcodeinf);
			for n := 1 to MpsBarcodeinf.Count do
			ISB_BW.Graphic.Assign(iGraphic); //20180104
			If iGraphic.ImageFormat <> ifBlackWhite Then //20180104
			begin
			if MpsBarcodeinf.r180[n] <> 0 then //依條碼角度轉影像
			begin
			Rotate(ISB.Graphic,MpsBarcodeinf.r180[n]);
			MpsGetBarcode(ISB.Graphic,MpsBarcodeinf);
			Break;
			end;
			ConvertToBW(ISB_BW.Graphic);
			end;
			FormID := BarCode2FormID; //取出FormID
			MpsGetBarcode(ISB_BW.Graphic, MpsBarcodeinf);
			//ShowMessage(IntToStr(MpsBarcodeinf.Count));
			For n := 1 To MpsBarcodeinf.Count Do
			Begin
			If MpsBarcodeinf.r180[n] <> 0 Then // 依條碼角度轉影像
			Begin
			Rotate(iGraphic, MpsBarcodeinf.r180[n]);
			MpsGetBarcode(iGraphic, MpsBarcodeinf);
			Break;
			End;
			End;
			FormID := BarCode2FormID;
			//ShowMessage('FormID='+FormID);
			// 取出FormID
			SaveFilename := FormID;
			if (TreeView1.Selected = NewTreeNode) Then
			begin
			if FindDivFormCode(FormID) Then //只找分案頁上的案件條碼
			begin
			If (TreeView1.Selected = NewTreeNode) Then
			Begin
			If FindDivFormCode(FormID) Then // 只找分案頁上的案件條碼
			Begin
			imageCount := 0;
			ClearView(1);
			ContextList.Clear;
			CaseID := BarCode2CaseID;
			if DirectoryExists(ImageSavePath + CaseID+'\') then
			begin
			_DelTree(ImageSavePath + CaseID+'\');
			SetCaseList('D',-1,CaseID);
			end;
			end;
			if CaseID = '' then
			begin
			If DirectoryExists(ImageSavePath + CaseID + '\') Then
			Begin
			_DelTree(ImageSavePath + CaseID + '\');
			SetCaseList('D', -1, CaseID);
			End;
			End;
			If CaseID = '' Then
			Begin
			CaseID := GetNoNameCase(ImageSavePath);
			ContextList.Clear;
			end;
			end;
			SavePath := ImageSavePath + CaseID+'\';
			End;
			End;
			SavePath := ImageSavePath + CaseID + '\';
			Str2Dir(SavePath);

			DocNo := FormCode2DocNo(FormID);
			DocDir := FindLastestDocDir(CaseID,DocNo);
			if DocNoNeedDiv(DocNo) then //要分份數
			begin
			if ((FormCode2Page(FormID) = '01') and (GetDocDir_Page(CaseID,DocDir)>0)) or (DocDir = '') then
			DocDir := DocNo2DocNoDir(ImageSavePath + CaseID+'\',DocNo);
			end
			Else //不分份數
			begin
			if DocNo <> '' then
			DocDir := FindLastestDocDir(CaseID, DocNo);
			If DocNoNeedDiv(DocNo) Then // 要分份數
			Begin
			If ((FormCode2Page(FormID) = '01') And
			(GetDocDir_Page(CaseID, DocDir) > 0)) Or (DocDir = '') Then
			DocDir := DocNo2DocNoDir(ImageSavePath + CaseID + '\', DocNo);
			End
			Else // 不分份數
			Begin
			If DocNo <> '' Then
			DocDir := DocNo
			else //Attach 附件
			DocDir := DocNo2DocNoDir(ImageSavePath + CaseID+'\',DocNo);
			end;
			{if ((FormCode2Page(FormID) = '01') and DocNoNeedDiv(DocNo)) or (FormID='') then //是表單第一頁且要分份
			DocDir := DocNo2DocNoDir(ImageSavePath + CaseID+'\',DocNo)
			Else if not DocNoNeedDiv(DocNo) then
			DocDir := DocNo; }
			if (not DirectoryExists(ImageSavePath + CaseID+'\'+DocDir+'\')) and (DocDir <> AttName) then
			SetDocNoList('A',-1,CaseID,DocDir,'1');
			SavePath := ImageSavePath + CaseID+'\'+DocDir+'\';
			Else // Attach 附件
			DocDir := DocNo2DocNoDir(ImageSavePath + CaseID + '\', DocNo);
			End;

			If (Not DirectoryExists(ImageSavePath + CaseID + '\' + DocDir + '\'))
			And (DocDir <> AttName) Then
			SetDocNoList('A', -1, CaseID, DocDir, '1');
			SavePath := ImageSavePath + CaseID + '\' + DocDir + '\';
			Str2Dir(SavePath);
			ContextList.Clear;
			if FileExists(SavePath+'Context.dat') then
			ContextList.LoadFromFile(SavePath+'Context.dat');
			If FileExists(SavePath + 'Context.dat') Then
			ContextList.LoadFromFile(SavePath + 'Context.dat');

			WriteCaseIndex(ImageSavePath + CaseID+'\'); //寫入案件索引
			if SaveFilename = '' then //附件
			SaveFilename:= Add_Zoo(ContextList.Count+1,3)+ext
			WriteCaseIndex(ImageSavePath + CaseID + '\');
			// 寫入案件索引
			If SaveFilename = '' Then // 附件
			SaveFilename := Add_Zoo(ContextList.Count + 1, 3) + ext
			Else
			SaveFilename := Add_Zoo(ContextList.Count+1,3)+'_'+SaveFilename+ext;
			SaveFilename := Add_Zoo(ContextList.Count + 1, 3) + '_' +
			SaveFilename + ext;

			for n := 1 to MpsBarcodeinf.Count do
			begin
			if MpsBarcodeinf.r180[n] <> 0 then //依條碼角度轉影像
			begin
			Rotate(ISB.Graphic,MpsBarcodeinf.r180[n]);
			MpsGetBarcode(ISB.Graphic,MpsBarcodeinf);
			For n := 1 To MpsBarcodeinf.Count Do
			Begin
			If MpsBarcodeinf.r180[n] <> 0 Then // 依條碼角度轉影像
			Begin
			Rotate(iGraphic, MpsBarcodeinf.r180[n]);
			MpsGetBarcode(iGraphic, MpsBarcodeinf);
			Break;
			end;
			end;
			//Rotate(ISB.Graphic,MpsBarcodeinf.r180[n]); //20170705 加入有條碼就轉正
			ISB.SaveToFile(SavePath+SaveFilename);

			SetContextList('A',-1,CaseID,DocDir,SaveFilename);
			if (TreeView1.Selected = NewTreeNode) Then
			End;
			End;
			//ShowMessage(IntToStr(iGraphic.Palette.palNumEntries));
			if (iGraphic.Palette.palNumEntries = 0) or (iGraphic.Palette.palNumEntries = 256) then //20171130 彩色會為0 黑白為2 灰階256
			begin
			if imageCount = 0 then
			begin
			SetCaseList('A',-1,CaseID);
			MyTreeNode1 := TreeView1.Items.AddChild(NewTreeNode,CaseID);
			iGraphic.Compression:=tcJPEG;
			iGraphic.JpegQuality:=cooom;
			end;

			If LowerCase(ExtractFileExt(SavePath + SaveFilename)) = '.tif' Then
			Begin
			If FileExists(SavePath + SaveFilename) Then
			SaveStream := TFileStream.Create(SavePath + SaveFilename, fmOpenReadWrite)
			Else
			SaveStream := TFileStream.Create(SavePath + SaveFilename, fmCreate);
			Try
			SaveStream.Seek(0, soFromBeginning);
			iGraphic.AppendToStream(SaveStream);
			Finally
			SaveStream.Free;
			End;
			End
			Else If LowerCase(ExtractFileExt(SavePath + SaveFilename))
			= '.jpg' Then
			Begin
			If FileExists(SavePath + SaveFilename) Then
			DeleteFile(SavePath + SaveFilename);
			// SaveStream := TFileStream.Create( PEFileName ,fmCreate );
			JpgGr := TJpegGraphic.Create;
			Try
			JpgGr.Assign(iGraphic);
			JpgGr.SaveQuality := 30;
			// JpgGr.AppendToStream(SaveStream);
			JpgGr.SaveToFile(SavePath + SaveFilename);
			Finally
			JpgGr.Free;
			// SaveStream.Free;
			End;
			End;

			SetContextList('A', -1, CaseID, DocDir, SaveFilename);
			If (TreeView1.Selected = NewTreeNode) Then
			Begin
			If imageCount = 0 Then
			Begin
			SetCaseList('A', -1, CaseID);
			MyTreeNode1 := TreeView1.Items.AddChild(NewTreeNode, CaseID);
			MyTreeNode1.ImageIndex := 2;
			MyTreeNode1.SelectedIndex := 2;
			Application.ProcessMessages;
			end;
			end;
			End;
			End;
			inc(imageCount);
			//DrawDocItem1(MytreeNode1,Doc_Inf_List,CaseID);
			//DrawDocItem(MyTreeNode1,FORM_INF_List,CaseID);
			end
			Else if TreeView1.Selected = MyTreeNode3 then
			begin
			SavePath := ImageSavePath + CaseID+'\'+NowDocDir+'\';
			// DrawDocItem1(MytreeNode1,Doc_Inf_List,CaseID);
			// DrawDocItem(MyTreeNode1,FORM_INF_List,CaseID);
			End
			Else If TreeView1.Selected = MyTreeNode3 Then
			Begin
			SavePath := ImageSavePath + CaseID + '\' + NowDocDir + '\';
			ContextList.Clear;
			if FileExists(ImageSavePath + CaseID+'\'+NowDocDir+'\Context.dat') then
			ContextList.LoadFromFile(ImageSavePath + CaseID+'\'+NowDocDir+'\Context.dat');
			if NowFormCode <> '' then
			SaveFilename := Add_Zoo(ContextList.Count+1,3)+'_'+NowFormCode+ext
			else
			SaveFilename := Add_Zoo(ContextList.Count+1,3)+ext;
			If FileExists(ImageSavePath + CaseID + '\' + NowDocDir +
			'\Context.dat') Then
			ContextList.LoadFromFile(ImageSavePath + CaseID + '\' + NowDocDir +
			'\Context.dat');
			If NowFormCode <> '' Then
			SaveFilename := Add_Zoo(ContextList.Count + 1, 3) + '_' +
			NowFormCode + ext
			Else
			SaveFilename := Add_Zoo(ContextList.Count + 1, 3) + ext;

			for n := 1 to MpsBarcodeinf.Count do
			begin
			if MpsBarcodeinf.r180[n] <> 0 then //依條碼角度轉影像
			begin
			Rotate(ISB.Graphic,MpsBarcodeinf.r180[n]);
			MpsGetBarcode(ISB.Graphic,MpsBarcodeinf);
			For n := 1 To MpsBarcodeinf.Count Do
			Begin
			If MpsBarcodeinf.r180[n] <> 0 Then // 依條碼角度轉影像
			Begin
			Rotate(iGraphic, MpsBarcodeinf.r180[n]);
			MpsGetBarcode(iGraphic, MpsBarcodeinf);
			Break;
			end;
			End;
			End;

			if (iGraphic.Palette.palNumEntries = 0) or (iGraphic.Palette.palNumEntries = 256) then //20171130 彩色會為0 黑白為2
			begin
			iGraphic.Compression:=tcJPEG;
			iGraphic.JpegQuality:=cooom;
			end;
			//Rotate(ISB.Graphic,MpsBarcodeinf.r180[n]); //20170705 加入有條碼就轉正
			ISB.SaveToFile(SavePath+SaveFilename);

			If LowerCase(ExtractFileExt(SavePath + SaveFilename)) = '.tif' Then
			Begin
			If FileExists(SavePath + SaveFilename) Then
			SaveStream := TFileStream.Create(SavePath + SaveFilename,
			fmOpenReadWrite)
			Else
			SaveStream := TFileStream.Create(SavePath + SaveFilename,
			fmCreate);
			Try
			SaveStream.Seek(0, soFromBeginning);
			iGraphic.AppendToStream(SaveStream);
			Finally
			SaveStream.Free;
			End;
			End

			Else
			Begin
			If LowerCase(ExtractFileExt(SavePath + SaveFilename)) = '.jpg' Then
			Begin
			If FileExists(SavePath + SaveFilename) Then
			DeleteFile(SavePath + SaveFilename);
			// SaveStream := TFileStream.Create( PEFileName ,fmCreate );
			JpgGr := TJpegGraphic.Create;
			Try
			JpgGr.Assign(iGraphic);
			JpgGr.SaveQuality := 30;
			// JpgGr.AppendToStream(SaveStream);
			JpgGr.SaveToFile(SavePath + SaveFilename);
			Finally
			JpgGr.Free;
			// SaveStream.Free;
			End;
			End;

			End;
			// ISB.SaveToFile(SavePath+SaveFilename);
			ContextList.Add(SaveFilename);
			ContextList.SaveToFile(SavePath+'Context.dat');
			end;
			end;
			ClearErrini(CaseID,MyTreeNode1); //清掉檢核記錄
			if (TreeView1.Selected = MyTreeNode1) or (TreeView1.Selected = NewTreeNode) then
			begin
			LoadImgFile;
			end
			Else
			begin
			DrawDocItem2(MytreeNode1,CaseID); //長出文件名稱的樹並傳回是否有申請書的影像
			page := GetCasePage(ImageSavePath,CaseID);
			MytreeNode1.Text := Format(_Msg('%s-%d頁'),[CaseID,page]);
			end;
			NewTreeNodeRefresh;
			Application.ProcessMessages;
			DataLoading(False,False);
			finally
			ISB.Free;
			end;
			end;
			ContextList.SaveToFile(SavePath + 'Context.dat');
			End;

			if iGraphic = iGraphic_First then
			iGraphic := iGraphic_Sec
			else
			iGraphic.Assign(nil);

			End //While 結束

			End;
			ClearErrini(CaseID, MyTreeNode1);
			// 清掉檢核記錄
			If (TreeView1.Selected = MyTreeNode1) Or
			(TreeView1.Selected = NewTreeNode) Then
			Begin
			LoadImgFile;
			End
			Else
			Begin
			DrawDocItem2(MyTreeNode1, CaseID);
			// 長出文件名稱的樹並傳回是否有申請書的影像
			page := GetCasePage(ImageSavePath, CaseID);
			// ShowMessage('page='+IntToStr(page));
			MyTreeNode1.Text := Format(_Msg('%s-%d頁'), [CaseID, page]);
			End;
			// ShowMessage('AAAA');
			NewTreeNodeRefresh;
			Application.ProcessMessages;
			DataLoading(false, false);


			finally
			ISB.Free;
			end;


			End;
			End;



			procedure TCB_IMGPSScanX.PM106Click(Sender: TObject);
			var
			@@ -2931,16 +3176,17 @@
			i : Integer;
			DocListForm : TDocListForm;
			OldName,NewName,Ext : String;
			NewFormID,NewFormName : String;
			NewFormID,NewFormName,CustomDocNo : String;
			begin
			DocListForm := TDocListForm.Create(self);
			try
			InitialLanguage(PatchDlg); //載入多國語言
			InitialLanguage(DocListForm); //載入多國語言
			DocListForm.CheckBox1.Visible:=True;
			for i := 1 to FORM_INF_List.Count - 1 do
			begin
			NewFormID := GetSQLData(FORM_INF_List,'T1.FORM_ID',i);
			NewFormName := GetSQLData(FORM_INF_List,'T1.FORM_DESC',i);
			if not FormIDAppear(NewFormID) then Continue;
			if not FormIDAppear(NewFormID) then Continue; //20170816 先秀全部的
			if (NewFormID <> FileName2FormCode(DisplayISB.FileName)) and FormIDExists(NewFormID,False,i) then
			begin
			DocListForm.FormIDList.Add(NewFormID+'#@#'+NewFormName);
			@@ -2953,30 +3199,64 @@
			end;
			if DocListForm.ShowModal = mrOk then
			begin
			NewFormID := DocListForm.DocLV.Selected.Caption;
			if NowFormCode <> AttName then
			if not (DocListForm.DocLV.Selected=nil) then
			NewFormID := DocListForm.DocLV.Selected.Caption;
			if DocListForm.CheckBox1.Checked then
			begin
			If Messagedlg(Format(_Msg('是否將"%s"的所有影像歸類成"%s"'),[FormCode2FormName(NowCaseNo,NowFormCode),FormCode2FormName(NowCaseNo,NewFormID)]),MtConfirmation,[mbyes,mbcancel],0) = mrcancel Then
			//歸類到自訂文件
			NewFormID:=DocListForm.Edit1.Text;
			if Trim(DocListForm.Edit1.Text)='' then
			begin
			Showmessage('未輸入文件名稱');
			Exit;
			end;
			if FindCustomDocName(DisplayPath,NewFormID) then
			begin
			Showmessage(Format('文件名稱:"%s"己存在',[NewFormID]));
			Exit;
			end;
			if NowFormCode <> AttName then
			begin
			If Messagedlg(Format(_Msg('是否將"%s"的所有影像歸類成"%s"'),[FormCode2FormName(NowCaseNo,NowFormCode),NewFormID]),MtConfirmation,[mbyes,mbcancel],0) = mrcancel Then
			Exit;
			end
			Else
			begin
			If Messagedlg(Format(_Msg('是否將"%s"的所有影像歸類成"%s"'),[_Msg('附件')+MyTreeNode3.Text,FormCode2FormName(NowCaseNo,NewFormID)]),MtConfirmation,[mbyes,mbcancel],0) = mrcancel Then
			Exit;
			end;
			CustomDocNo := GetNewCustomDocNo(DisplayPath,NewFormID);
			//ShowMessage('CustomDocNo='+CustomDocNo);
			ShowText := _Msg('歸類中,請稍侯');
			DataLoading(True,True);
			FormIDReplace(NowCaseNo,NowDocDir,NowFormCode,CustomDocNo+'010101A');
			end
			Else
			else
			begin
			If Messagedlg(Format(_Msg('是否將"%s"的所有影像歸類成"%s"'),[_Msg('附件')+MyTreeNode3.Text,FormCode2FormName(NowCaseNo,NewFormID)]),MtConfirmation,[mbyes,mbcancel],0) = mrcancel Then
			Exit;
			//歸類到既有文件
			if NowFormCode <> AttName then
			begin
			If Messagedlg(Format(_Msg('是否將"%s"的所有影像歸類成"%s"'),[FormCode2FormName(NowCaseNo,NowFormCode),FormCode2FormName(NowCaseNo,NewFormID)]),MtConfirmation,[mbyes,mbcancel],0) = mrcancel Then
			Exit;
			end
			Else
			begin
			If Messagedlg(Format(_Msg('是否將"%s"的所有影像歸類成"%s"'),[_Msg('附件')+MyTreeNode3.Text,FormCode2FormName(NowCaseNo,NewFormID)]),MtConfirmation,[mbyes,mbcancel],0) = mrcancel Then
			Exit;
			end;
			ShowText := _Msg('歸類中,請稍侯');
			DataLoading(True,True);
			//ShowMessage('NowDocDir='+NowDocDir);
			FormIDReplace(NowCaseNo,NowDocDir,NowFormCode,NewFormID);

			end;
			ShowText := _Msg('歸類中,請稍侯');
			DataLoading(True,True);
			//FormIDReplace(DisplayPath,NowFormCode,FormID);
			//ShowFileReplace(DisplayPath,FormID);
			FormIDReplace(NowCaseNo,NowDocDir,NowFormCode,NewFormID);
			ClearErrini(NowCaseno,MyTreeNode1); //清掉檢核記錄
			DrawDocItem2(MytreeNode1,NowCaseno);
			//DrawDocItem(MytreeNode1,FORM_INF_List,NowCaseno);

			DataLoading(False,False);
			TreeView1.Selected := MyTreeNode1;
			TreeView1Click(self);
			end;

			finally
			DocListForm.Free;
			end;
			@@ -3019,6 +3299,7 @@
			CustomDocNo : String;
			DocDir : String;
			SavePath : String;
			ST1:TStringList;
			begin
			if InputQuery('輸入其他文件名稱','文件名稱',CustomDocName) then
			begin
			@@ -3029,7 +3310,7 @@
			Showmessage(Format('文件名稱:"%s"己存在',[CustomDocName]));
			Exit;
			end;

			ST1:=TStringList.Create;
			CustomDocNo := GetNewCustomDocNo(DisplayPath,CustomDocName);
			DocDir := CustomDocNo;
			SavePath := ImageSavePath+NowCaseNo+'\'+DocDir+'\';
			@@ -3317,6 +3598,9 @@
			PM101.Visible:=false;
			end;

			if FMode='ESCAN' then
			PM101.Visible:=false;

			if FModeName='異動件' then
			begin
			PM101.Visible := True;
			@@ -3329,8 +3613,8 @@
			PM103.Visible := True; //掃瞄器加入影像
			//PM107.Visible := True; //寫備註
			//PM109.Visible := True; //檢核此筆
			if FCustDocYN <> 'N' Then
			PM110.Visible := True; //新增自訂文件
			// if FCustDocYN <> 'N' Then
			// PM110.Visible := True; //新增自訂文件 20170914 先不在tree 中做自訂文件讓user在縮圖做
			PM104.Visible := True; //檔案加入影像
			if (FMode = 'NSCAN') then
			begin
			@@ -3346,8 +3630,8 @@
			PM101.Visible := True; //刪除
			//PM107.Visible := True; //寫備註
			//PM109.Visible := True; //檢核此筆
			if FCustDocYN <> 'N' Then
			PM110.Visible := True; //新增自訂文件
			// if FCustDocYN <> 'N' Then
			// PM110.Visible := True; //新增自訂文件
			if FImgDelete='Y' then
			begin
			PM101.Visible:=True;
			@@ -3381,8 +3665,8 @@
			PM104.Visible := True; //檔案加入影像
			PM108.Visible := True; //歸類
			PM103.Visible := True; //掃瞄器加入影像
			if FCustDocYN <> 'N' Then
			PM110.Visible := True; //新增自訂文件
			// if FCustDocYN <> 'N' Then
			// PM110.Visible := True; //新增自訂文件
			if GetFormIDPage(ContextList,NowFormCode) < 1 Then
			begin
			PM108.Visible := False; //歸類
			@@ -3684,6 +3968,11 @@

			end;

			procedure TCB_IMGPSScanX.ScrollBox1MouseEnter(Sender: TObject);
			begin
			ScrollBox1.SetFocus;
			end;

			procedure TCB_IMGPSScanX.SelectScanBtnClick(Sender: TObject);
			begin
			Panel1.Enabled := False;
			@@ -3831,11 +4120,11 @@
			//CreateFormID_FormName(DisplayPath); //產生FormID_FormName.dat
			//CreateDocNo_DocName(DisplayPath); //產生DocNo_Name.dat
			//Showmessage(CreateDocNo_Info(DisplayPath)); //產生 Docno,份數,頁數;Docno,份數,頁數的回傳字串
			lb1.Caption:='AAAAAAAAAAA';
			//lb1.Caption:='AAAAAAAAAAA';
			//Showmessage(CreateDocnoFrom_Info(NowCaseno));
			//Showmessage(self.CreateCustDocNoFrom_Info(NowCaseno));

			initkscan;
			//ShowMessage('FMaxUploadSize='+FMaxUploadSize);
			//initkscan;
			showmessage('FUrl='+FUrl+#10#13+
			'FCaseID='+FCaseID+#10#13+
			'FMode='+FMode+#10#13+
			@@ -3865,8 +4154,11 @@
			'FCaseNoLength='+ IntToStr(FCaseNoLength) +#10#13+
			'FImgDelete='+ FImgDelete+#10#13+
			'FIsExternal='+ FIsExternal+#10#13+
			'FCheck_main_form='+ FCheck_main_form);
			'FWH_category='+FWH_category+
			'FCheck_main_form='+ FCheck_main_form+#10#13+
			'FMaxUploadSize='+FMaxUploadSize);
			//FImgDelete:='Y';
			LoadImgFile;
			{ ShowMessage('UpLPoint='+IntToStr(UpLPoint.X)+','+IntToStr(UpLPoint.Y)+#10#13+
			'UpRPoint='+IntToStr(UpRPoint.X)+','+IntToStr(UpRPoint.Y)+#10#13+
			'DownLPoint='+IntToStr(DownLPoint.X)+','+IntToStr(DownLPoint.Y)+#10#13+
			@@ -3933,6 +4225,10 @@
			Try
			Scanner.OpenSource;
			Scanner.Duplex := ScanDuplex; //雙面

			if FMode='SAMPLESCAN' then
			Scanner.Duplex:=False;

			//Scanner.FEEDERENABLED := not ScanFlatCB.Checked; // 先拿掉平台
			If ScanImgSetUse Then
			begin
			@@ -4045,14 +4341,14 @@
			end;
			end;
			pScanInfo^.Graphic.Compression := tcJpeg;
			pScanInfo^.Graphic.JpegQuality := 70;
			pScanInfo^.Graphic.JpegQuality := FJpgCompression;
			end
			else if pScanInfo^.Graphic.ImageFormat = ifColor256 Then
			begin
			//Ext := '.jpg';
			ConvertToGray(pScanInfo^.Graphic);
			pScanInfo^.Graphic.Compression := tcJpeg;
			pScanInfo^.Graphic.JpegQuality := 70;
			pScanInfo^.Graphic.JpegQuality := FJpgCompression;
			end
			else if pScanInfo^.Graphic.ImageFormat = ifGray256 Then
			begin
			@@ -4070,7 +4366,13 @@
			end;
			end;
			pScanInfo^.Graphic.Compression := tcJpeg;
			pScanInfo^.Graphic.JpegQuality := 70;
			pScanInfo^.Graphic.JpegQuality := FJpgCompression;
			//ShowMessage(IntToStr(pScanInfo^.Graphic.JpegQuality));
			//if pScanInfo^.Graphic.Compression = tcJpeg then
			//begin
			//ShowMessage('jpg');
			//end;

			end
			else
			begin
			@@ -4103,6 +4405,19 @@
			end;
			//iGraphic.Assign(iGraphic_First);
			iGraphic := iGraphic_First;

			if iGraphic.ImageFormat=ifGray256 then //20180104
			begin
			iGraphic.Compression:=tcJPEG;
			iGraphic.JpegQuality:=FJpgCompression;
			end;
			if iGraphic.ImageFormat=ifTrueColor then //20180104
			begin
			iGraphic.Compression:=tcJPEG;
			iGraphic.JpegQuality:=FJpgCompression;
			end;


			while not iGraphic.IsEmpty do
			begin
			//Application.ProcessMessages;
			@@ -4112,6 +4427,26 @@
			ImageScrollBox1NewGraphic(ImageScrollBox1.Graphic);

			MpsGetBarcode(ISB_BW.Graphic,MpsBarcodeinf);
			For i := 1 To MpsBarcodeinf.Count Do
			Begin
			If MpsBarcodeinf.r180[i] <> 0 Then // 依條碼角度轉影像
			Begin
			Rotate(iGraphic, MpsBarcodeinf.r180[i]);
			Break;
			End;
			End;

			if iGraphic.ImageFormat=ifGray256 then //20180104 因此旋轉後變為回packbits 所以要改為jpeg
			begin
			iGraphic.Compression:=tcJPEG;
			iGraphic.JpegQuality:=FJpgCompression;
			end;
			if iGraphic.ImageFormat=ifTrueColor then
			begin
			iGraphic.Compression:=tcJPEG;
			iGraphic.JpegQuality:=FJpgCompression;
			end;

			PageEnd;
			IF PEFileName <> '' Then
			begin
			@@ -4136,7 +4471,7 @@
			JpgGr := TJpegGraphic.Create;
			try
			JpgGr.Assign(iGraphic);
			JpgGr.SaveQuality := 30;
			JpgGr.SaveQuality := FJpgCompression;
			//JpgGr.AppendToStream(SaveStream);
			JpgGr.SaveToFile(PEFileName);
			finally
			@@ -4928,6 +5263,16 @@
			begin
			PARA_CONTENT := GetSQLData(WORK_INF_List,'PARA_CONTENT',i);
			DivPageFormIDList.CommaText := PARA_CONTENT;
			end
			Else if UpperCase(GetSQLData(WORK_INF_List,'PARA_NO',i)) = 'FILE_COMPRESSION' Then //20171211 jpg to tif 壓縮比
			begin
			PARA_CONTENT := GetSQLData(WORK_INF_List,'PARA_CONTENT',i);
			FJpgCompression := StrToInt(PARA_CONTENT);
			end
			Else if UpperCase(GetSQLData(WORK_INF_List,'PARA_NO',i)) = 'MAX_UPLOAD_SIZE' Then //取得上傳大小的限制(MB)
			begin
			PARA_CONTENT := GetSQLData(WORK_INF_List,'PARA_CONTENT',i);
			FMaxUploadSize := PARA_CONTENT;
			end;
			end;
			ScanDuplex := Def_ScanDuplex;
			@@ -5426,6 +5771,16 @@
			StringtoFile(IN_WH_DocNoList.Text,'D:\121.txt');}
			end;

			function TCB_IMGPSScanX.CheckRequiredColumnValues(workno, caseno:String): Boolean;
			begin
			//
			Result:=False;
			if (workno='HLN') and (caseno[9]='3') then
			Result:=True;
			if (workno='HLN') and (caseno[9]='4') then
			Result:=True;
			end;

			Procedure TCB_IMGPSScanX.CheckRule2OMRErrInfo; //檢核規則填入OMRErrINFo Record
			var i : Integer;
			CheckNo : String;
			@@ -5481,6 +5836,7 @@

			DeleteFile(Path+FileName);
			DocDir := Path2DocDir(Path,CaseID);
			//ShowMessage('DocDir='+DocDir);
			SetContextList('D',-1,CaseID,DocDir,FileName);
			{FileList:=TStringlist.Create;
			try
			@@ -5521,10 +5877,11 @@
			begin
			if ISExistImg(ImageSavePath+CaseID+'\'+DocDir+'\'+FileList.Strings[i]) then
			begin
			ShowMessage('有圖為非當次掃瞄，不可刪除');
			Exit;
			//ShowMessage('有圖為非當次掃瞄，不可刪除');
			Break;
			end;
			end;
			//ShowMessage(FileList.Strings[i]);
			DeleteImageFile(ImageSavePath+CaseID+'\'+DocDir+'\',FileList.Strings[i],CaseID);
			end;
			end;
			@@ -5582,6 +5939,40 @@
			Cust_DocNoList.LoadFromFile(Path+'CustomDocNo.dat');
			end;

			Function TCB_IMGPSScanX.DeleteDocNoFileForESCAN(Path,DocNo:String):Boolean; //刪除指定DocNo文件
			var
			i,j,k: Integer;
			FName : String;
			ST1,ST2,ST3:TStringList;

			begin

			Result := False;
			//ShowMessage(DocNo);
			for i := ContextList.Count - 1 downto 0 do
			begin
			FName := ContextList.Strings[i];
			If (DocNo = FormCode2DocNo(FileName2FormCode(FName))) or (DocNo=AttName) then
			begin
			if not ISExistImg(Path+'\'+FName) then
			begin
			DeleteFile(Path+'\'+FName);
			ContextList.Delete(i);
			end;
			Result := True; //有刪到指定文件
			end;
			end;
			ContextList.SaveToFile(Path+'\Context.dat');
			ContextList.LoadFromFile(Path+'\Context.dat');

			if ContextList.Count=0 then
			begin
			_DelTree(Path);
			SetDocNoList('D',-1,NowCaseNo,NowDocDir,'');
			end;

			end;

			Procedure TCB_IMGPSScanX.DeleteShowFile(Path:String); //刪除顯示中的影像
			var
			i : Integer;
			@@ -5614,22 +6005,55 @@
			Function TCB_IMGPSScanX.CheckCaseDocNoPage(CaseID,DocNo,Version:String;Pages:Integer):Integer; //取案件裡的文件_版本頁數
			var
			i,n,Count : integer;
			S : TStringlist;
			S, S2 : TStringlist;
			FormCode,iPage : String;
			docInt,tempInt:integer;
			v,v2:integer;
			begin
			Count := 0;
			docInt:=0;
			tempInt:=0;
			S := TStringlist.Create;
			S2 := TStringlist.Create;
			try
			S.LoadFromFile(ImageSavePath+CaseID+'\upload\Context.dat');
			S2.LoadFromFile(ImageSavePath+CaseID+'\upload\DocDir.dat'); //2017 1220 改成只承認第一份的
			for I := 1 to pages do //從0到pages-1 改成 1到pages 20170316 這樣可以修改檢核的頁數問題
			begin
			iPage := Add_Zoo(i,2);
			for n := 0 to S.Count - 1 do
			begin

			if (FWH_category='N') and (FIs_In_Wh='Y') then
			begin
			if ISExistImg(ImageSavePath+CaseID+'\upload\'+S.Strings[n]) then
			begin
			Continue;
			end;
			end;
			if Length(S2.Strings[n])>8 then //2017 1220 改成只承認第一份的
			begin
			v:=Pos('(',S2.Strings[n]);
			v2:=Pos(')',S2.Strings[n]);
			tempInt:=StrToInt(Copy(S2.Strings[n],v+1,v2-v-1));

			if docInt=0 then
			begin
			docInt:=tempInt;
			end;

			if docInt<>tempInt then
			begin
			Break
			end;
			end;

			FormCode := FileName2FormCode(S.Strings[n]);
			//Showmessage('1:'+version+','+FormCode2Version(FormCode)+','+DocNo+','+FormCode2DocNo(FormCode)+','+iPage+','+FormCode2Page(FormCode));
			LogFile1.LogToFile(logTimeString+'CheckCaseDocNoPage caseno='+CaseID+','+version+','+FormCode2Version(FormCode)+','+DocNo+','+FormCode2DocNo(FormCode)+','+iPage+','+FormCode2Page(FormCode));
			if (version = FormCode2Version(FormCode)) and (DocNo = FormCode2DocNo(FormCode)) and (ipage = FormCode2Page(FormCode)) then
			begin
			LogFile1.LogToFile(logTimeString+'CheckCaseDocNoPage caseno='+CaseID+','+version+','+FormCode2Version(FormCode)+','+DocNo+','+FormCode2DocNo(FormCode)+','+iPage+','+FormCode2Page(FormCode));
			//Showmessage(version+','+DocNo+',iPage='+iPage);
			//Showmessage(inttostr(Count+1));
			Inc(Count);
			@@ -5639,6 +6063,7 @@
			end;
			finally
			S.Free;
			S2.free;
			end;
			Result := Count;
			end;
			@@ -5655,6 +6080,13 @@
			S.LoadFromFile(ImageSavePath+CaseID+'\upload\Context.dat');
			for i := 0 to S.Count - 1 do
			begin
			if FWH_category='N' then
			begin
			if ISExistImg(ImageSavePath+CaseID+'\upload\'+S.Strings[i]) then
			begin
			Continue;
			end;
			end;
			iFormCode := FileName2FormCode(S.Strings[i]);
			if FormCode = iFormCode then
			begin
			@@ -5710,7 +6142,9 @@
			SizeStr : String;
			S : TStringlist;
			v,v1:Integer;
			IsRecordMD5:Boolean;
			begin
			IsRecordMD5:=False;
			FormID := FileName2FormCode(FileName);
			if FormID = '' then Exit;

			@@ -5726,6 +6160,12 @@
			begin
			//ShowMessage('BBBBBBB');
			ImageScrollBox1.LoadFromFile(ImageSavePath+CaseID+'\Upload\'+FileName,1);

			if (FWH_category='N') and ISExistImg(ImageSavePath+CaseID+'\Upload\'+FileName) then
			begin
			Exit;//20171103 補件原有的圖不作resize
			end;

			//FindPoint(ImageScrollBox1.Graphic,UpLPoint,UpRPoint,DownLPoint,NowW,NowH);
			FindPoint(ISB_BW.Graphic,UpLPoint,UpRPoint,DownLPoint,NowW,NowH,ANCHOR);

			@@ -5738,8 +6178,15 @@
			IF (SizeStr <> '') and (Copy(SizeStr,1,v) <> 'ERROR') then
			begin
			//ShowMessage('CCCCC');

			if (ISExistImg(ImageSavePath+CaseID+'\Upload\'+FileName)) and (reSizeExistImgList.IndexOf(LoadFileGetMD5(ImageSavePath+CaseID+'\Upload\'+FileName))=-1) then
			begin
			IsRecordMD5:=True;
			end;
			ImageScrollBox1.SaveToFile(ImageSavePath+CaseID+'\Upload\'+FileName);
			if IsRecordMD5 then
			begin
			reSizeExistImgList.add(LoadFileGetMD5(ImageSavePath+CaseID+'\Upload\'+FileName));
			end;
			//showmessage(ImageSavePath+CaseID+'\Upload\'+FileName);
			S := TStringlist.Create; ///20110422拿掉換成上傳才做
			if FileExists(ImageSavePath+CaseID+'\Upload\ReSize.dat') then
			@@ -5822,6 +6269,8 @@
			casepath:String;
			filesizeInt:integer;
			case_page:string;
			Fname:String;
			FileRec:TSearchrec;
			begin
			Result := True;
			TransName := CaseID;
			@@ -5885,7 +6334,7 @@

			for I := 0 to ST1.Count - 1 do
			begin
			if (Pos('_',St1.Strings[i])<>1) and (Pos('_',St1.Strings[i])<>-11) then
			if (Pos('_',St1.Strings[i])<>1) and (Pos('_',St1.Strings[i])<>-1) then
			begin
			str1:=Copy(ST1.Strings[i],1,Pos('_',St1.Strings[i])-1);
			ST2.Add(str1);
			@@ -5939,6 +6388,26 @@
			if HaveMask then
			ZipMaskFile(Path,MaskPath,Path,'MaskImg.zip'); //有遮罩設定的才產生
			/////壓檔////

			///檢查上傳的zip大小////
			FName :=Path+ 'Img.zip';

			FindFirst(FName, faAnyfile, FileRec);

			//FMaxUploadSize
			//ShowMessage(IntToStr(FileRec.Size));
			//Result:=False;
			//exit; //目前上傳檔案大小為xxMB，已超過50MB，無法上傳 %.3f ,[FileRec.Size / 1048576]
			If FileRec.Size > StrtoInt(FMaxUploadSize) * 1048576 Then // 檢查檔案大小
			Begin
			ShowMessage(Format('%s目前上傳檔案大小為%.3fMB，已超過'+FMaxUploadSize+'MB，無法上傳',[caseid,FileRec.Size / 1048576]) );
			FindClose(FileRec);
			Result := False;
			Exit;
			End;
			FindClose(FileRec);
			///檢查上傳的zip大小////
			//ShowMessage('last_add_formidstr='+last_add_formidstr);
			////上傳/////
			SendData:='data='+HTTPEncode(UTF8Encode(FData))
			+'&verify='+FVerify
			@@ -5956,23 +6425,21 @@
			+'&in_doc2='+HTTPEncode(UTF8Encode(In_Doc2));
			//ShowMessage('SendData='+SendData);
			//ShowMessage(FData+#10#13+Doc_Data);

			//exit;
			if not upFile(HTTPSClient,FUrl,'service/imgpsc/IMGPSC02/caseupload',SendData,'file',Path+'Img.zip',FReWrite,Memo1,False) then
			begin
			Showmessage(Format(_Msg('傳送案件編號(%s)檔案時,網路發生錯誤!!'+_Msg('錯誤代碼:')),[CaseID])+Inttostr(HttpError.HttpErrorCode)+' '+HttpError.HttpReason);
			Showmessage(Inttostr(HttpError.HttpErrorCode)+' '+HttpError.HttpReason+'.');
			Result := False;
			Exit;
			end;
			if memo1.Lines.Strings[0] = '1' then
			begin
			Showmessage(Format(_Msg('傳送案件編號(%s)檔案時,網路發生錯誤!!')+_Msg('錯誤原因:'),[CaseID])+memo1.Lines.Strings[1]);
			Showmessage(Format(_Msg('')+_Msg(''),[CaseID])+memo1.Lines.Strings[1]+'。');
			Result := False;
			Exit;
			end
			Else if Pos('<script type="text/javascript" src="scripts/CW00/login.js"></script>',Memo1.Lines.Text) > 0 then
			Else if Pos('<script type="text/javascript" src="scripts/IMGPS00/login.js"></script>',Memo1.Lines.Text) > 0 then
			begin
			Showmessage(Format(_Msg('傳送案件編號(%s)檔案時,網路發生錯誤!!')+_Msg('錯誤原因:')+_Msg('閒置過久或被登出,請重新登入'),[CaseID]));
			Showmessage(Format(_Msg('')+_Msg('')+_Msg('閒置過久或被登出,請重新登入'),[CaseID]));
			Result := False;
			Exit;
			end;
			@@ -6225,17 +6692,17 @@
			end;
			if Memo1.Lines.Strings[0] = '1' then
			begin
			HttpErrStr :=_Msg('錯誤原因:')+memo1.Lines.Strings[1];
			HttpErrStr :=_Msg('錯誤原因:')+memo1.Lines.Strings[1]+'。';
			Result := False;
			Exit;
			end
			Else if Pos('<script type="text/javascript" src="scripts/CW00/login.js"></script>',Memo1.Lines.Text) > 0 then
			Else if Pos('<script type="text/javascript" src="scripts/IMGPS00/login.js"></script>',Memo1.Lines.Text) > 0 then
			begin
			HttpErrStr := _Msg('錯誤原因:')+_Msg('閒置過久或被登出,請重新登入');
			Result := False;
			Exit;
			end;
			//ShowMessage('sssss');
			//ShowMessage('替換zip');
			AttPath := Path + 'AttFile\';
			if FileExists(Path+CaseID+'.zip') then
			begin
			@@ -6547,6 +7014,13 @@
			S.LoadFromFile(Path+'Context.dat');
			for I := 0 to S.Count - 1 do
			begin
			if FWH_category='N' then
			begin
			if (ISExistImg(Path+S.Strings[i])) or (reSizeExistImgList.IndexOf(LoadFileGetMD5(Path+S.Strings[i]))<>-1) then
			begin
			Continue;
			end;
			end;
			FormCode := FileName2FormCode(S.Strings[i]);
			DocNo := FormCode2DocNo(FormCode);
			Ver := FormCode2Version(FormCode);
			@@ -6697,7 +7171,8 @@
			if Index <> -1 then
			begin
			//SetRecordEditedDocDir('D',CaseNo,CaseDocNoList.Strings[Index]); //20140624 修改刪除文件時也記一筆異動,刪掉會無法通知前端網頁有異動
			SetRecordEditedDocDir('A',CaseNo,CaseDocNoList.Strings[Index]);
			SetRecordEditedDocDir('A',CaseNo,CaseDocNoList.Strings[Index]); //20170912 要刪除不然我寫不下去

			CaseDocNoList.Delete(Index);
			CaseDocNo_CopiesList.Delete(Index);

			@@ -6709,7 +7184,7 @@
			if DocDir = CaseDocNoList.Strings[i] then
			begin
			//SetRecordEditedDocDir('D',CaseNo,CaseDocNoList.Strings[i]); //20140624 修改刪除文件時也記一筆異動,刪掉會無法通知前端網頁有異動
			SetRecordEditedDocDir('A',CaseNo,CaseDocNoList.Strings[i]);
			SetRecordEditedDocDir('A',CaseNo,CaseDocNoList.Strings[i]); //20170912 要刪除不然我寫不下去
			CaseDocNoList.Delete(i);
			CaseDocNo_CopiesList.Delete(i);
			Break;
			@@ -6723,7 +7198,7 @@
			end;
			end;
			//Showmessage('abc'+#13+ImageSavePath+CaseNo+'\CaseDocNo.dat'+#13+inttostr(CaseDocNoList.Count)+#13+CaseDocNoList.Text);
			if CaseDocNoList.Count > 0 then
			if CaseDocNoList.Count >= 0 then
			begin
			CaseDocNoList.SaveToFile(ImageSavePath+CaseNo+'\CaseDocNo.dat');
			CaseDocNo_CopiesList.SaveToFile(ImageSavePath+CaseNo+'\CaseDocNo_Copies.dat');
			@@ -6741,6 +7216,7 @@
			//DocNo:String;
			begin
			//DocNo := FormCode2DocNo(FileName2FormCode(FileName));
			//ShowMessage('FileName='+FileName);
			if DocDir = '' then
			DocDir := AttName ; //附件
			ContextList.Clear;
			@@ -6834,6 +7310,24 @@
			end;
			end;

			Function TCB_IMGPSScanX.CheckCaseAttach_OK:Boolean; //檢查是否有未歸類的案件
			var
			i,j : Integer;
			begin
			Result := True;
			for i := 0 to NewTreeNode.Count - 1 do
			begin
			for j := 0 to NewTreeNode.Item[i].Count - 1 do
			begin
			if Pos(_msg('未歸類'),NewTreeNode.Item[i].Item[j].Text) > 0 then
			begin
			Result := False;
			Break;
			end;
			end;
			end;
			end;

			Procedure TCB_IMGPSScanX.CreateEmptyCase(Path,CaseID:String); //產生空白案號(重掃件用)
			var
			S : TStringlist;
			@@ -6886,16 +7380,42 @@
			FormID : String;
			OldFile,NewFile:String;
			Ext : String;
			ST1:TStringList;
			begin
			ST1:=TStringList.Create;
			OldFileList := TStringlist.Create;
			NewFileList := TStringlist.Create;
			try
			NewDocNo := FormCode2DocNo(NewFormID);
			NewDocDir := FindLastestDocDir(CaseID,NewDocNo);
			if NewDocDir = '' then
			NewDocDir := NewDocNo;
			begin
			if DocNoNeedDiv(NewDocNo) then
			begin
			NewDocDir:=DocNo2DocNoDir(ImageSavePath + NowCaseno+'\',NewDocNo);
			end
			else
			begin
			NewDocDir := NewDocNo;
			end;
			end;
			//ShowMessage('NewDocDir='+NewDocDir);
			if DocNoNeedDiv(NewDocNo) and (FormCode2Page(NewFormID)='01') then
			begin
			NewDocDir := DocNo2DocNoDir(ImageSavePath+CaseID+'\',NewDocNo);
			end
			else
			begin
			ST1.Clear;
			if FileExists(ImageSavePath + NowCaseno+'\'+NewDocDir+'\Context.dat') then
			begin
			ST1.LoadFromFile(ImageSavePath + NowCaseno+'\'+NewDocDir+'\Context.dat');
			if ISExistImg(ImageSavePath + NowCaseno+'\'+NewDocDir+'\'+ST1.Strings[0]) then
			begin
			NewDocDir := DocNo2DocNoDir(ImageSavePath + NowCaseno+'\',NewDocNo);
			end;
			end;
			end;
			if Not DirectoryExists(ImageSavePath+CaseID+'\'+NewDocDir) then
			begin
			MkDir(ImageSavePath+CaseID+'\'+NewDocDir);
			@@ -6938,6 +7458,7 @@
			finally
			OldFileList.Free;
			NewFileList.Free;
			ST1.Free;
			end;
			end;

			@@ -7036,13 +7557,14 @@

			Function TCB_IMGPSScanX.GetCasePage(Path,CaseID:String):Integer;
			var
			DocDirList,FileList :TStringlist;
			DocDirList,FileList,ST1 :TStringlist;
			iDocDir,iDocNo : String;
			i,Count : Integer;
			i,n,Count : Integer;
			begin
			Count := 0;
			DocDirList := TStringlist.Create;
			FileList := TStringlist.Create;
			ST1:=TStringList.Create;
			try
			if FileExists(Path+CaseID+'\CaseDocNo.dat') then
			DocDirList.LoadFromFile(Path+CaseID+'\CaseDocNo.dat');
			@@ -7057,11 +7579,35 @@
			begin
			Continue;
			end;}
			if not DocNoAppear(iDocNo) then Continue;
			//if not DocNoAppear(iDocNo) then Continue; //20170817 先註解

			FileList.Clear;
			if FileExists(Path+CaseID+'\'+iDocDir+'\Context.dat') then
			begin
			FileList.LoadFromFile(Path+CaseID+'\'+iDocDir+'\Context.dat');

			if (FWH_category='N') and (FIs_In_Wh='Y') then
			begin
			ST1.Clear;
			for n := 0 to FileList.Count - 1 do
			begin
			if ISExistImg(Path+CaseID+'\'+iDocDir+'\'+FileList.Strings[n]) then
			begin
			ST1.Add(FileList.Strings[n]);
			end;
			end;

			for n := 0 to ST1.Count - 1 do
			begin
			if (FileList.IndexOf(ST1.Strings[n])<>-1) and (not DocNoIs_In_WH(iDocNo)) then
			begin
			FileList.Delete(FileList.IndexOf(ST1.Strings[n]));
			end;
			end;
			end;
			end;


			Count := Count+ FileList.Count;
			end;
			if FileExists(Path+CaseID+'\'+AttName+'\Context.dat') then
			@@ -7074,6 +7620,7 @@
			finally
			DocDirList.Free;
			FileList.Free;
			ST1.free;
			end;
			end;

			@@ -7151,8 +7698,8 @@

			Function TCB_IMGPSScanX.GetCase_PageCount(var CaseCount,PageCount:Integer):Boolean; //取出案件的數量及頁數
			var
			i,n: Integer;
			CaseList,DocList,FileList : TStringlist;
			i,n,k: Integer;
			CaseList,DocList,FileList,ST1 : TStringlist;
			begin
			Result := False;
			CaseCount := 0;
			@@ -7160,19 +7707,23 @@
			CaseList := TStringlist.Create;
			DocList := TStringlist.Create;
			FileList := TStringlist.Create;
			ST1:= TStringlist.Create;
			try
			ImageSavePath := ImagePath;
			CaseList.Clear;
			if FileExists(ImageSavePath + 'CaseList.dat') then
			CaseList.LoadFromFile(ImageSavePath + 'CaseList.dat');
			CaseCount := CaseCount+CaseList.Count;
			//ShowMessage('ImageSavePath='+ImageSavePath+#10#13+'CaseList.Count='+IntToStr(CaseList.Count));
			for i := 0 to CaseList.Count - 1 do
			begin
			DocList.Clear;
			If FileExists(ImageSavePath+CaseList.Strings[i]+'\CaseDocNo.dat') Then
			DocList.LoadFromFile(ImageSavePath+CaseList.Strings[i]+'\CaseDocNo.dat');
			//ShowMessage('DocList='+DocList.Text);
			for n := 0 to DocList.Count - 1 do
			begin
			//ShowMessage(DocList.Strings[n]+','+BoolToStr(DocNoAppear(DocNoDir2DocNo(DocList.Strings[n])),true));
			if not DocNoAppear(DocNoDir2DocNo(DocList.Strings[n])) then Continue;
			FileList.Clear;
			If FileExists(ImageSavePath+CaseList.Strings[i]+'\'+DocList.Strings[n]+'\Context.dat') Then
			@@ -7184,14 +7735,41 @@
			If FileExists(ImageSavePath+CaseList.Strings[i]+'\'+Attname+'\Context.dat') Then
			FileList.LoadFromFile(ImageSavePath+CaseList.Strings[i]+'\'+Attname+'\Context.dat');
			//Showmessage(ImageSavePath+CaseList.Strings[i]+'\'+Attname+'\Context.dat');
			//Showmessage(FileList.Text);
			//Showmessage('FileList='+FileList.Text);
			PageCount := PageCount+FileList.Count;
			//Showmessage(inttostr(PageCount));
			//Showmessage('PageCount='+inttostr(PageCount));
			if (FWH_category='N') and (FIs_In_Wh='Y') then //20170912 針對非入庫並當次掃描做頁數計算
			begin
			if FileExists(ImageSavePath+NowCaseno+'\EditedDocDir.dat') then
			begin
			ST1.LoadFromFile(ImageSavePath+NowCaseno+'\EditedDocDir.dat');
			for n := 0 to ST1.Count - 1 do
			begin
			if ST1.Strings[n]=AttName then Continue;
			//ShowMessage(ST1.Strings[n]+','+BoolToStr(DocNoIs_In_WH(DocNoDir2DocNo(ST1.Strings[n])),true));
			if not DocNoIs_In_WH(DocNoDir2DocNo(ST1.Strings[n])) then
			begin

			FileList.Clear;
			if FileExists(ImageSavePath+CaseList.Strings[i]+'\'+ST1.Strings[n]+'\Context.dat') then
			begin
			FileList.LoadFromFile(ImageSavePath+CaseList.Strings[i]+'\'+ST1.Strings[n]+'\Context.dat');
			for k := 0 to FileList.Count - 1 do
			begin
			if not ISExistImg(ImageSavePath+CaseList.Strings[i]+'\'+ST1.Strings[n]+'\'+FileList.Strings[k]) then
			PageCount := PageCount+1;
			end;
			end;
			end;
			end;
			end;
			end;
			end;
			Finally
			CaseList.Free;
			DocList.Free;
			FileList.Free;
			ST1.Free
			end;
			Result := True;
			end;
			@@ -7264,8 +7842,12 @@
			if Path = '' then Exit;
			S := TStringlist.Create;
			try
			S.Add(Case_loandoc);
			S.SaveToFile(Path+'CaseIndex.dat');
			try
			S.Add(Case_loandoc);
			S.SaveToFile(Path+'CaseIndex.dat');
			except on E: Exception do
			end;

			finally
			S.Free;
			end;
			@@ -7299,6 +7881,27 @@

			end;


			procedure TCB_IMGPSScanX.ReduceLogFile; //20171011 必免log檔掌太大
			var
			ST1:TStringlist;
			I:integer;
			begin
			ST1:=TStringList.Create;
			if FileExists(LngPath+'IMGPSCheck.log') then
			begin
			ST1.LoadFromFile(LngPath+'IMGPSCheck.log');
			if ST1.count>100000 then
			begin
			for I := 0 to 10000 do
			begin
			ST1.Delete(0);
			end;
			ST1.SaveToFile(LngPath+'IMGPSCheck.log');
			end;
			end;
			ST1.Free;
			end;

			Procedure TCB_IMGPSScanX.ClearCaseIndex;
			begin
			@@ -7590,6 +8193,33 @@
			begin
			ScanDuplex := ScanDuplexCB.Checked;
			//R_W_ScanIni('W'); //user要求改成預設後不能改
			end;

			procedure TCB_IMGPSScanX.ScanGrayCBClick(Sender: TObject);
			begin

			if ScanGrayCB.Checked then
			begin
			ScanColor:=ifGray256;
			end
			else
			begin
			if FScanColor = 0 then
			begin
			ScanColor := ifBlackWhite;
			end;

			if FScanColor = 1 then
			begin
			ScanColor := ifGray256 ;
			end;

			if FScanColor = 2 then
			begin
			ScanColor := ifTrueColor ;
			end;
			end;

			end;

			Function TCB_IMGPSScanX.GetFormatID(CaseID: string):String;
			@@ -7898,7 +8528,16 @@
			end;
			CaseHelpBtn.Visible := False;
			LoadImgFile;
			Showmessage(NowCaseNo+_Msg('傳送完成'));
			if (FMode='NSCAN') or (FMode='DSCAN') then
			begin
			Showmessage(NowCaseNo+_Msg('影像上傳完成。此案已進入下一流程。'));
			end;

			if FMode='ESCAN' then
			begin
			Showmessage(NowCaseNo+_Msg('影像已補件完成。'));
			end;

			DataLoading(False,False);
			end
			Else
			@@ -7980,12 +8619,15 @@
			FormName : String;
			CaseDocNoList,CaseDocNo_CopiesList,StrList : TStringlist;
			iiDocNo,iiFormID,iiDocVer : String;
			ST1:TStringList;
			begin
			Result := False;
			FileList := TStringlist.Create;
			CaseDocNoList := TStringlist.Create;
			CaseDocNo_CopiesList := TStringlist.Create;
			StrList := TStringlist.Create;
			ST1:=TStringList.Create;
			LogFile1.LogToFile(logTimeString+'產文件樹開始');
			try
			CaseNode.ImageIndex := 1;
			CaseNode.SelectedIndex := 1;
			@@ -8004,23 +8646,51 @@
			//Showmessage(ImageSavePath+Caseno+'\'+CaseDocNoList.Strings[i]+'\Context.dat');
			if FileExists(ImageSavePath+Caseno+'\'+CaseDocNoList.Strings[i]+'\Context.dat') then
			FileList.LoadFromFile(ImageSavePath+Caseno+'\'+CaseDocNoList.Strings[i]+'\Context.dat');
			//Showmessage('aaa '+FileList.Text);
			iDocNo := DocNoDir2DocNo(CaseDocNoList.Strings[i]);
			ST1.Clear;

			LogFile1.LogToFile(logTimeString+'FileList.Text='+FileList.CommaText);
			if (FWH_category='N') and (FIs_In_Wh='Y') then
			begin
			for n := 0 to FileList.Count - 1 do
			begin
			if ISExistImg(ImageSavePath+Caseno+'\'+CaseDocNoList.Strings[i]+'\'+FileList.Strings[n]) then
			begin
			ST1.Add(FileList.Strings[n]);
			end;
			end;

			for n := 0 to ST1.Count - 1 do
			begin
			if (FileList.IndexOf(ST1.Strings[n])<>-1) and (not DocNoIs_In_WH(iDocNo)) then
			begin
			FileList.Delete(FileList.IndexOf(ST1.Strings[n]));
			end;
			end;
			end;

			LogFile1.LogToFile(logTimeString+'WH_category='+FWH_category+',Is_In_Wh='+FIs_In_Wh+',FileList.Text='+FileList.CommaText);
			if FileList.Count=0 then Continue;

			DocNoCopies := Strtoint(CaseDocNo_CopiesList.Strings[i]);
			DocNoPage := FileList.Count;
			iDocNo := DocNoDir2DocNo(CaseDocNoList.Strings[i]);
			//Showmessage(iDocNo);
			//Showmessage(DocNo2DocName(Caseno,iDocNo));
			//Showmessage(iDocNo);
			//Showmessage(DocNo2DocName(Caseno,iDocNo));
			//ShowMessage('FileList='+FileList.Text);
			{if (((FIs_In_Wh = 'Y') and (not DocNoIs_In_WH(iDocNo))) or //入庫掃描不看非入庫文件
			((FIs_In_Wh = 'N') and (DocNoIs_In_WH(iDocNo)))) and
			((iDocNo <> 'Attach') and (Copy(iDocNo,1,5)<>'ZZZZZ')) then //非入庫掃描不看入庫文件
			begin
			Continue;
			end;}
			if not DocNoAppear(iDocNo) then Continue;

			//if not DocNoAppear(iDocNo) then Continue;


			//DocNode := TreeView1.Items.AddChild(CaseNode,Format('%s{%s}-%d'+_msg('頁'),[CaseDocNoList.Strings[i],DocNo2DocName(Caseno,iDocNo),DocNoPage]));
			//DocNode := TreeView1.Items.AddChild(CaseNode,Format('%s{%s}-%d'+_msg('份'),[CaseDocNoList.Strings[i],DocNo2DocName(Caseno,iDocNo),DocNoCopies]));
			//ShowMessage('iDocNo='+iDocNo);
			DocNode := TreeView1.Items.AddChild(CaseNode,Format('%s{%s}-%d'+_msg('份'),[DocNo2DocName(Caseno,iDocNo),CaseDocNoList.Strings[i],DocNoCopies]));

			if GetUseCase('F',ImageSavePath+Caseno+'\',CaseDocNoList.Strings[i]) <> '' Then
			@@ -8114,6 +8784,7 @@

			if DirectoryExists(ImageSavePath+Caseno+'\'+AttName) then
			begin

			FileList.Clear;
			if FileExists(ImageSavePath+Caseno+'\'+AttName+'\Context.dat') then
			FileList.LoadFromFile(ImageSavePath+Caseno+'\'+AttName+'\Context.dat')
			@@ -8143,11 +8814,48 @@
			end;
			end;
			end;

			if FModeName='件' then //20170904 先裝死因為異動同時存在兩種附件太難寫
			begin
			if DirectoryExists(ImageSavePath+Caseno+'\Attach') then
			begin
			FileList.Clear;
			if FileExists(ImageSavePath+Caseno+'\Attach'+'\Context.dat') then
			FileList.LoadFromFile(ImageSavePath+Caseno+'\Attach'+'\Context.dat')
			Else
			begin
			Rmdir(ImageSavePath+Caseno+'\Attach');
			Exit;
			end;
			DocNoPage := FileList.Count;
			iDocNo := DocNoDir2DocNo(AttName);
			//DocNode := TreeView1.Items.AddChild(CaseNode,Format('%s{%s}-%d'+_msg('份'),[AttName,DocNo2DocName(Caseno,iDocNo),1]));
			DocNode := TreeView1.Items.AddChild(CaseNode,Format('%s{%s}-%d'+_msg('份'),[DocNo2DocName(Caseno,iDocNo),'Attach',1]));
			DocNode.ImageIndex := 2;
			DocNode.SelectedIndex := 2;
			for n := 0 to FileList.Count - 1 do
			begin
			FormID := FileName2FormCode(FileList.Strings[n]);
			if not CheckFormIDExists(DocNode,FormID) then
			begin
			FormPage := GetFormIDPage(FileList,FormID);
			FormName := FormCode2FormName(Caseno,FormID);
			//FormNode := TreeView1.Items.AddChild(DocNode,FormID+'{'+FormName+'}-'+inttostr(FormPage)+_msg('頁'));
			FormNode := TreeView1.Items.AddChild(DocNode,FormName+'{'+FormID+'}-'+inttostr(FormPage)+_msg('頁'));

			FormNode.ImageIndex := 4;
			FormNode.SelectedIndex := 4;
			end;
			end;
			end;
			end;
			LogFile1.LogToFile(logTimeString+'產文件樹結束');
			Finally
			FileList.Free;
			CaseDocNoList.Free;
			CaseDocNo_CopiesList.Free;
			StrList.Free;
			ST1.Free;
			end;
			end;

			@@ -8259,9 +8967,9 @@
			if PrintForm.CheckListBox1.Checked[i] then
			begin
			if S = '' then
			S := S+FileList.Strings[i]
			S := S+PrintForm.CheckListBox1.Items[i]
			Else
			S := S+#13+FileList.Strings[i];
			S := S+#13+PrintForm.CheckListBox1.Items[i];
			end;
			end;
			if S = '' then
			@@ -8447,7 +9155,7 @@
			ST1.LoadFromFile(path+'FormCode_Name.dat');
			for I := 0 to ST1.Count - 1 do
			begin
			if (Pos('_',St1.Strings[i])<>1) and (Pos('_',St1.Strings[i])<>-11) then
			if (Pos('_',St1.Strings[i])<>1) and (Pos('_',St1.Strings[i])<>-1) then
			begin
			str1:=Copy(ST1.Strings[i],1,Pos('_',St1.Strings[i])-1);
			LastInitFormidList.Add(str1);
			@@ -8525,6 +9233,7 @@
			end;

			CasePage := GetCasePage(ImageSavePath,CaseList.Strings[i]);
			//ShowMessage('CasePage='+IntToStr(CasePage));
			MytreeNode1 := TreeView1.Items.AddChild(NewTreeNode,Format(_Msg('%s-%d頁'),[CaseList.Strings[i],CasePage]));
			MytreeNode1.ImageIndex := 1;
			MytreeNode1.SelectedIndex := 1;
			@@ -8671,6 +9380,11 @@
			v := Pos('-',NewTreeNode.Text);
			NewTreeNode.Text := Format(_Msg('%s-共%d筆共%d頁'),[Copy(NewTreeNode.Text,1,v-1),CaseCount,PageCount]);
			end;
			end;

			function TCB_IMGPSScanX.logTimeString: String;
			begin
			Result:=FormatDateTime('yyyymmdd hh:mm:ss',now) +' caseNo='+NowCaseno+' ';
			end;

			Function TCB_IMGPSScanX.FindDivFormCode(FormCode:String):Boolean; //找有沒有分案的條碼
			@@ -8890,6 +9604,8 @@
			end;

			end;

			//ShowMessage('FormIDCount='+IntToStr(FormIDCount)+#10#13+'MpsBarcodeinf.count='+IntToStr(MpsBarcodeinf.count));
			if FormIDCount = 2 then
			begin
			Result := True;
			@@ -8915,6 +9631,12 @@
			DocNo := 'ZZZZZ'+Add_Zoo(Ct,3);
			if FIs_In_Wh <> 'Y' then //不是入庫文件
			DocNo := 'YYYYY'+Add_Zoo(Ct,3);

			if (FMode='ESCAN') and (FWH_category='N') then //20170914 補件下改成非入庫的自定文件
			begin
			DocNo := 'YYYYY'+Add_Zoo(Ct,3);
			end;

			FormID := DocNo+'010101A';
			ini.WriteInteger('CustomCount','Count',Ct);
			ini.WriteString(DocNo,'FormID',FormID);
			@@ -9109,6 +9831,7 @@
			S := TStringlist.Create;
			GraphicPrinter := TDibGraphicPrinter.Create;
			PrtDialog := TPrintDialog.Create(self);
			//PrtDialog.Copies:=99;
			try
			IF PrtDialog.Execute Then
			begin
			@@ -9764,6 +10487,20 @@
			((FIs_In_Wh = 'N') and (DocNoIs_In_WH(iDocNo)))) and //非入庫掃描不看入庫文件
			((iDocNo <> 'Attach') and (iDocNo <> 'S_Attach') and (Copy(iDocNo,1,5)<>'ZZZZZ')) then
			Result := False;

			if (FIs_In_Wh='Y') and (FWH_category='Y') then //20170816 新加
			begin
			if (((FIs_In_Wh = 'Y') and (not DocNoIs_In_WH(iDocNo))) or //入庫掃描不看非入庫文件
			((FIs_In_Wh = 'N') and (DocNoIs_In_WH(iDocNo)))) and //非入庫掃描不看入庫文件
			((iDocNo <> 'Attach') and (iDocNo <> 'S_Attach') and (Copy(iDocNo,1,5)<>'ZZZZZ')) then
			Result := False;
			end;

			if (FIs_In_Wh='Y') and (FWH_category='N') then //20170816 新加
			begin
			Result:=True;
			end;

			end;

			Function TCB_IMGPSScanX.DocNoAppear(DocNo:String):Boolean; //DocNo是否可出現
			@@ -9773,6 +10510,7 @@
			((FIs_In_Wh = 'N') and (DocNoIs_In_WH(DocNo)) or (DocNo ='Attach') )) {and //非入庫掃描不看入庫文件
			(Copy(DocNo,1,5)<>'ZZZZZ')} then
			Result := False;

			end;

			Function TCB_IMGPSScanX.GetDocNoCount(CaseID,DocNo:String):Integer; //取DocNo數量
			@@ -10652,6 +11390,7 @@
			begin
			If FindSQLData(Doc_Inf_List,'DOC_U_DESC','DOC_NO',DocNo,0,FindResult) Then
			begin
			//ShowMessage(FindResult.Text);
			Result := GetFindResult('DOC_U_DESC');
			end;
			end;
			@@ -10829,6 +11568,17 @@
			S.LoadFromFile(ImageSavePath + CaseID+'\upload\Context.dat');
			for i := 0 to S.Count - 1 do
			begin
			LogFile1.LogToFile(logTimeString+S.Strings[i]+' ISExistImg='+BoolToStr(ISExistImg(ImageSavePath+CaseID+'\upload\'+S.Strings[i]),true));
			LogFile1.LogToFile(logTimeString+S.Strings[i]+' reSizeExistImgList='+BoolToStr(reSizeExistImgList.IndexOf(LoadFileGetMD5(ImageSavePath+CaseID+'\upload\'+S.Strings[i]))<>-1,true));
			if FWH_category='N' then
			begin
			if (ISExistImg(ImageSavePath+CaseID+'\upload\'+S.Strings[i]))
			or (reSizeExistImgList.IndexOf(LoadFileGetMD5(ImageSavePath+CaseID+'\upload\'+S.Strings[i]))<>-1) then
			begin
			Continue;
			end;
			end;

			LForm := FileName2FormCode(S.Strings[i]);
			AddOk := True;
			for n := 0 to OMRFileList.Count - 1 do
			@@ -10909,6 +11659,7 @@

			end;
			//ShowMessage('MainFormID='+MainFormID);
			LogFile1.LogToFile(logTimeString+' '+FModeName+' '+CaseID+' '+'MainFormID='+MainFormID);
			if MainFormID = ''then
			begin
			//20131203 yuu說不檢查這個,先拿掉 20170315 楷琳說未歸類要擋 20170726 因此有檢查必要FormID 所以可以拿掉
			@@ -10928,7 +11679,9 @@
			begin
			//////主要非主要文件//////
			DistinctDocinCase(ImageSavePath+CaseID+'\upload\');

			//ShowMessage(DocNo_VerinCase.Text);
			//DocNo_VerinCase.Add('31A00101_1706A');
			LogFile1.LogToFile(logTimeString+' '+CaseID+' '+'DocNo_VerinCase.Text='+DocNo_VerinCase.Text);
			if ModeNeedCheck(OMRErrInfo[1].Mode,FMode) then //是否要檢核
			begin
			for i := 0 to DocNo_VerinCase.Count - 1 do
			@@ -10939,6 +11692,8 @@
			MainVersion :=Copy(DocNo_VerinCase.Strings[i],v+1,v1-v); //FormCode2Version(MainFormID);
			MainFormPage := GetDataDocNoPage(MainDocNo,MainVersion); //資料庫記錄主文件頁數
			CaseFormPage := CheckCaseDocNoPage(CaseID,MainDocNo,MainVersion,MainFormPage); //案件主文件的頁數
			LogFile1.LogToFile(logTimeString+CaseID+',MainDocNo='+MainDocNo+',MainVersion='+MainVersion+',MainFormPage='+IntToStr(MainFormPage)+',CaseFormPage='+IntToStr(CaseFormPage));
			//CheckFirstDocNoPage
			IF (MainFormPage > 0) and (MainFormPage <> CaseFormPage) then
			begin
			ErrStr:=MainDocNo+Format(OMRErrInfo[1].Info,[Inttostr(MainFormPage),Inttostr(CaseFormPage)]); //主要文件需有XX頁僅附XX頁
			@@ -10949,7 +11704,7 @@
			end;
			end;
			//////主要非主要文件/////
			//showmessage(MainFormID);
			//showmessage(MainFormID);
			MainDocNo := FormCode2DocNo(MainFormID);
			MainVersion := FormCode2Version(MainFormID);
			if FindSQLData(DM_FORM_INF_List,'DEPE_FORM_ID,MUTEX_FORM_ID','MAIN_FORM_ID,DOC_VERSION',MainDocNo+','+MainVersion,0,FindResult) then
			@@ -10971,6 +11726,13 @@
			begin
			if not Case_DocNoExists(CaseID,List.Strings[i]) then //沒附相依文件
			begin
			if FWH_category='N' then
			begin
			if ISExistImg(ImageSavePath+CaseID+'\upload\'+List.Strings[i]) then
			begin
			Continue;
			end;
			end;
			ErrStr:=Format(OMRErrInfo[2].Info,[DocNo2DocName(CaseID,List.Strings[i])]); //沒附相依文件
			OMRErr2ini(CaseID,ErrStr,'','','','','','',False,OMRErrInfo[2].Ignore,OMRErrInfo[2].Display);
			if OMRErrInfo[2].Display then
			@@ -10988,6 +11750,13 @@
			begin
			if Case_DocNoExists(CaseID,List.Strings[i]) then //附了互斥文件
			begin
			if FWH_category='N' then
			begin
			if ISExistImg(ImageSavePath+CaseID+'\upload\'+List.Strings[i]) then
			begin
			Continue;
			end;
			end;
			ErrStr:=Format(OMRErrInfo[3].Info,[DocNo2DocName(CaseID,List.Strings[i])]); //有附互斥文件
			OMRErr2ini(CaseID,ErrStr,'','','','','','',False,OMRErrInfo[3].Ignore,OMRErrInfo[3].Display);
			if OMRErrInfo[3].Display then
			@@ -10996,7 +11765,7 @@
			end;
			end;
			//////互斥文件/////
			end;
			end; //MainFormID結束
			//end;
			List.LoadFromFile(ImageSavePath + CaseID+'\upload\Context.dat');
			for i := 0 to List.Count - 1 do
			@@ -11036,13 +11805,24 @@
			end;
			//if AllCheck then
			//begin
			//////最大頁數/////
			//////最大頁數///
			LogFile1.LogToFile(logTimeString+'最大頁數A段 '+CaseID+' '+'OMRFileList.Text='+OMRFileList.Text);
			DistinctFormCode(CaseID);
			if ModeNeedCheck(OMRErrInfo[10].Mode,FMode) then //是否要檢核
			begin
			//ShowMessage(OMRFileList.Text);
			//ShowMessage('AAA'+OMRFileList.Text);
			LogFile1.LogToFile(logTimeString+'最大頁數B段 '+CaseID+' '+'OMRFileList.Text='+OMRFileList.Text);
			For i := 0 to OMRFileList.Count - 1 do
			begin
			if FModeName='異動件' then Continue;

			if FWH_category='N' then
			begin
			if ISExistImg(ImageSavePath+CaseID+'\upload\'+OMRFileList.Strings[i]) then
			begin
			Continue;
			end;
			end;
			FormCode := FileName2FormCode(OMRFileList.Strings[i]);
			FormDataPages := GetDataFormCodePages(FormCode);

			@@ -11065,22 +11845,30 @@
			DistinctFormCode(CaseID);
			ValueXT := TXmltool.Create;
			Try
			//ShowMessage('必填'+OMRFileList.Text);
			LogFile1.LogToFile(logTimeString+'必填 '+CaseID+' '+'OMRFileList.Text='+OMRFileList.Text);
			For i := 0 to OMRFileList.Count - 1 do
			begin
			//ShowMessage('OMRFileList.Strings['+IntToStr(i)+']'+OMRFileList.Strings[i]);
			if CheckRequiredColumnValues(FWork_NO,CaseID) then Continue;

			OMRFile := OMRFileList.Strings[i];
			OMRFormCode := FileName2FormCode(OMRFileList.Strings[i]);
			OMRFormName := FormCode2FormName(CaseID,OMRFormCode);
			Anchor := FormID2Anchor(OMRFormCode);
			///依十字定位點縮放////
			ImageReSize_FormID(CaseID,OMRFile);
			////依十字定位點縮放////
			////依十字定位點縮放///
			//Display1.Lines.Add('OMRFile='+OMRFile+',OMRFormCode='+OMRFormCode+',OMRFormName='+OMRFormName);
			LogFile1.LogToFile(logTimeString+'OMRFile='+OMRFile+',OMRFormCode='+OMRFormCode+',OMRFormName='+OMRFormName);
			//ShowMessage('KKKKK');
			if not FileExists(CheckXmlPath+OMRFormCode+'.xml') then //沒有Xml就不用檢核
			Continue;


			//ShowMessage('11638 OMRFileList.Strings['+IntToStr(i)+']'+OMRFileList.Strings[i]);
			XT := TXmltool.Create(CheckXmlPath+OMRFormCode+'.xml');
			RelaXT := TXmltool.Create;

			//ShowMessage('ModeNeedCheck='+BoolToStr(ModeNeedCheck(OMRErrInfo[4].Mode,FMode),true));
			try
			//*****必填******
			if ModeNeedCheck(OMRErrInfo[4].Mode,FMode) then //是否要檢核
			@@ -11130,7 +11918,7 @@
			Until not XT.SubNodes['/form/settype1/'].Next ;
			end;
			//*****必填******

			//ShowMessage('11692 OMRFileList.Strings['+IntToStr(i)+']'+OMRFileList.Strings[i]);
			//if AllCheck then
			//begin
			//*****有值相關文件的欄位也要有值*****
			@@ -11169,10 +11957,16 @@
			Anchor1 := FormID2Anchor(RelaFormCode);
			RelaXT.LoadFromFile(CheckXmlPath+RelaFormCode+'.xml');
			Display1.Lines.Add(RelaFile+','+RelaFormName);
			ISB8.LoadFromFile(ImageSavePath+CaseID+'\upload\'+RelaFile,1); //20170815
			ISB8W:= ISB8.Graphic.Width;
			ISB8H:= ISB8.Graphic.Height;
			FindPoint(ISB8.Graphic,UpLPoint,UpRPoint,DownLPoint,ISB8W,ISB8H,ANCHOR); //20170815 抓相關然欄位所在圖檔的定位
			//ShowMessage(RelaFile);
			//ShowMessage(ImageSavePath+CaseID+'\upload\'+RelaFile);
			if RelaFile<>'' then
			begin
			ISB8.LoadFromFile(ImageSavePath+CaseID+'\upload\'+RelaFile,1); //20170815
			ISB8W:= ISB8.Graphic.Width;
			ISB8H:= ISB8.Graphic.Height;
			FindPoint(ISB8.Graphic,UpLPoint,UpRPoint,DownLPoint,ISB8W,ISB8H,ANCHOR); //20170815 抓相關然欄位所在圖檔的定位
			end;

			OMROK := False;
			//OMROK := False;
			//if RelaXT.SubNodes['/form/settype2/'].First then
			@@ -11226,6 +12020,7 @@
			Until not XT.SubNodes['/form/settype3/'].Next ;
			end;
			//*****有值相關文件的欄位也要有值*****
			//ShowMessage('11788 OMRFileList.Strings['+IntToStr(i)+']'+OMRFileList.Strings[i]);

			//*****有值相關文件的欄位不能有值*****
			if ModeNeedCheck(OMRErrInfo[11].Mode,FMode) then //是否要檢核
			@@ -11265,10 +12060,15 @@
			RelaFormName := FormCode2FormName(CaseID,RelaFormCode);
			Anchor1 := FormID2Anchor(RelaFormCode);
			RelaXT.LoadFromFile(CheckXmlPath+RelaFormCode+'.xml');
			ISB8.LoadFromFile(ImageSavePath+CaseID+'\upload\'+RelaFile,1); //20170815
			ISB8W:= ISB8.Graphic.Width;
			ISB8H:= ISB8.Graphic.Height;
			FindPoint(ISB8.Graphic,UpLPoint,UpRPoint,DownLPoint,ISB8W,ISB8H,ANCHOR); //20170815 抓相關然欄位所在圖檔的定位

			if RelaFile<>'' then
			begin
			ISB8.LoadFromFile(ImageSavePath+CaseID+'\upload\'+RelaFile,1); //20170815
			ISB8W:= ISB8.Graphic.Width;
			ISB8H:= ISB8.Graphic.Height;
			FindPoint(ISB8.Graphic,UpLPoint,UpRPoint,DownLPoint,ISB8W,ISB8H,ANCHOR); //20170815 抓相關然欄位所在圖檔的定位
			end;

			OMROK := False;
			//OMROK := False;
			//if RelaXT.SubNodes['/form/settype2/'].First then
			@@ -11326,7 +12126,7 @@
			end;
			//*****有值相關文件的欄位不能有值*****


			//ShowMessage('11889 OMRFileList.Strings['+IntToStr(i)+']'+OMRFileList.Strings[i]);

			//*****有值相依文件*****
			if ModeNeedCheck(OMRErrInfo[5].Mode,FMode) then //是否要檢核
			@@ -11489,6 +12289,7 @@
			RelaXT.Free;
			end;
			end;
			//必填迴圈結束
			Finally
			ValueXT.Free;
			end;
			@@ -11715,10 +12516,13 @@
			v ,v1 : Integer;
			List_DocNo,Trans_DocNo,List_FormCode,Form_Page: String;
			iDocNo : String;
			iGroupNo,page,Ct : Integer;
			iGroupNo,page,Ct,int1 : Integer;
			ST1:TStringList;
			begin
			ShowText := '影像顯示中,請稍候';
			DataLoading(True,True);
			ST1:=TStringList.Create;
			//Display1.Lines.Clear;
			IF DocNo = 'ShowAll' then //顯示所有的影像 (因為附件會傳空字串,所以用ShowAll)
			begin
			ClearView(1);
			@@ -11728,26 +12532,54 @@
			Exit;
			end;
			CreatePreViewISB(GetCasePage(ImageSavePath,NowCaseno));
			//Showmessage(inttostr(GetCasePage(ImageSavePath,NowCaseno)));
			//Showmessage(inttostr(GetCasePage(ImageSavePath,NowCaseno)));
			Ct := 0;
			For i := 0 to CaseDocNoList.Count-1 do
			begin
			{iDocno := DocNoDir2DocNo(CaseDocNoList.Strings[i]);
			if (((FIs_In_Wh = 'Y') and (not DocNoIs_In_WH(iDocNo))) or //入庫掃描不看非入庫文件
			((FIs_In_Wh = 'N') and (DocNoIs_In_WH(iDocNo)))) and
			((iDocNo <> 'Attach') and (Copy(iDocNo,1,5)<>'ZZZZZ')) then //非入庫掃描不看入庫文件

			if (FWH_category='N') and (FIs_In_Wh='Y') then
			begin
			Continue;
			end; }
			if FileExists(ImageSavePath+NowCaseno+'\EditedDocDir.dat') then
			begin
			ST1.LoadFromFile(ImageSavePath+NowCaseno+'\EditedDocDir.dat');
			end;
			end;

			iDocNo := CaseDocNoList.Strings[i];
			if not DocNoAppear(DocNoDir2DocNo(iDocNo)) then continue;

			//ShowMessage('ST1.Count='+IntToStr(ST1.Count));
			if ST1.Count<>0 then
			begin
			if ST1.IndexOf(iDocNo)<>-1 then
			begin
			end
			else
			begin
			if not DocNoAppear(DocNoDir2DocNo(iDocNo)) then continue; //20170817 這不能被註解
			end;
			end
			else
			begin
			if not DocNoAppear(DocNoDir2DocNo(iDocNo)) then continue; //20170817 這不能被註解
			end;
			ContextList.Clear;
			if FileExists(Path+iDocNo+'\Context.dat') then
			ContextList.LoadFromFile(Path+iDocNo+'\Context.dat');
			//ShowMessage('ContextList='+ContextList.Text);
			for n := 0 to ContextList.Count - 1 do
			begin

			if (FWH_category='N') and (FIs_In_Wh='Y') then
			begin
			if ISExistImg(Path+iDocNo+'\'+ContextList.Strings[n]) then
			begin

			if not DocNoIs_In_WH(Copy(iDocNo,1,8)) then
			begin
			Continue;
			end;
			end;
			end;

			inc(Ct);
			ISB := TImageScrollBox(FindComponent(ISBName+intToStr(Ct)));
			ISB.AntiAliased := True;
			@@ -11759,6 +12591,7 @@
			ISB.Redraw(true);

			end;

			end;
			//if DirectoryExists(Path+'Attach') then
			if DirectoryExists(Path+AttName) then
			@@ -11778,18 +12611,38 @@
			ISB.LoadFromFile(Path+iDocNo+'\'+ContextList.Strings[n],1);
			end;
			end;

			FitPreViewISB;

			end
			Else if (DocNo <> '') and (FormID = '') then //顯示指定DocNo+組別的影像附件傳 Attach
			begin
			begin //顯示文件層下的影像
			iDocNo := DocNo;
			ContextList.Clear;
			if FileExists(Path+iDocNo+'\Context.dat') then
			ContextList.LoadFromFile(Path+iDocNo+'\Context.dat');

			//ShowMessage('ContextList.Count='+IntToStr(ContextList.Count));
			CreatePreViewISB(ContextList.Count);
			//ShowMessage(IntToStr(ContextList.Count));
			int1:=0;
			//ShowMessage(BoolToStr(DocNoIs_In_WH(Copy(iDocNo,1,8)),true));
			For i := 0 to ContextList.Count -1 do
			begin
			ISB := TImageScrollBox(FindComponent(ISBName+intToStr(i+1)));
			if (FWH_category='N') and (FIs_In_Wh='Y') then
			begin
			if ISExistImg(Path+iDocNo+'\'+ContextList.Strings[i]) then
			begin

			if not DocNoIs_In_WH(Copy(iDocNo,1,8)) and ( iDocNo<>'Attach') then
			begin
			inc(int1);
			Continue;
			end;
			end;
			end;
			//ShowMessage(Path+iDocNo+'\'+ContextList.Strings[i]);
			ISB := TImageScrollBox(FindComponent(ISBName+intToStr(i+1-int1)));
			ISB.AntiAliased := True;
			if ISB.ZoomPercent > 100 then
			ISB.AntiAliased := False;
			@@ -11811,60 +12664,42 @@
			page := 0;
			Ct := 0;
			CreatePreViewISB(Pages);
			//ShowMessage('formID page'+IntToStr(Pages)+', ContextList='+ContextList.Text);
			For i := 0 to ContextList.Count -1 do
			begin
			if FileName2FormCode(ContextList.Strings[i]) = FormID then
			begin
			if (FWH_category='N') and (FIs_In_Wh='Y') then
			begin
			//ShowMessage(Path+iDocNo+'\'+ContextList.Strings[i]);
			//ShowMessage(BoolToStr(ISExistImg(Path+iDocNo+'\'+ContextList.Strings[i]),true));
			if ISExistImg(Path+iDocNo+'\'+ContextList.Strings[i]) then
			begin
			if not DocNoIs_In_WH(FormCode2DocNo(FormID)) then
			Continue;
			end;
			end;
			inc(Ct);
			ISB := TImageScrollBox(FindComponent(ISBName+intToStr(Ct)));
			//ShowMessage(ISB.Name);
			ISB.AntiAliased := True;
			if ISB.ZoomPercent > 100 then
			ISB.AntiAliased := False;
			ISB.LoadFromFile(Path+iDocNo+'\'+ContextList.Strings[i],1);
			DpiResize(ISB.Graphic,36);
			ISB.Redraw(true);

			//NowShowFileList.Add(ContextList.Strings[i]);
			end;
			end;
			FitPreViewISB;
			end;
			end;
			{Else if (DocNo = 'Attach') and (FormID = 'Attach') then //附件傳 Attach
			begin
			If (TreeView1.Selected <> nil) Then
			begin
			iGroupNo := 0;
			page := 0;
			CreatePreViewISB(Pages);
			For i := 0 to ContextList.Count -1 do
			begin
			List_FormCode := FileName2FormCode(ContextList.Strings[i]);
			Form_Page := FormCode2Page(List_FormCode);
			List_DocNo := FormCode2DocNo(List_FormCode);
			Trans_DocNo := Context_DocnoList.Strings[i];
			if (Trans_DocNo = DocNo) then
			begin
			if List_FormCode = FormID then
			begin
			inc(Page);
			if Page = GroupNo+1 then
			begin
			ISB := TImageScrollBox(FindComponent(ISBName+intToStr(1)));
			ISB.AntiAliased := True;

			if ISB.ZoomPercent > 100 then
			ISB.AntiAliased := False;
			ISB.LoadFromFile(Path+ContextList.Strings[i],1);
			NowShowFileList.Add(ContextList.Strings[i]);
			end;
			end;
			end;
			end;
			FitPreViewISB;
			end;
			end;}

			if FindComponent(ISBName+'1') <> nil then
			begin
			ISBClick(TImageScrollBox(FindComponent(ISBName+'1')));
			end;
			ISB1Click(ISB1);
			DataLoading(False,False);
			end;
			@@ -11981,6 +12816,7 @@
			ISB : TImageScrollBox;
			Panel : TPanel;
			i,W,H : Integer;
			myDate : TDateTime;
			begin
			FreePreViewISB;
			ScrollBox1.HorzScrollBar.Visible := False;
			@@ -11988,32 +12824,38 @@
			H := 250;
			for I := 1 to Count do
			begin
			Panel := TPanel.Create(Self);
			Panel.Name := 'M_Pl'+inttostr(i);
			Panel.Left := 4;
			Panel.Top := (i-1)H+(6i);
			Panel.Height := H;
			Panel.Width := W;
			Panel.Parent := ScrollBox1;
			Panel.Caption :='';
			ISB := TImageScrollBox.Create(Self);
			ISB.Name := ISBName+inttostr(i);
			ISB.Parent := Panel;
			ISB.Align := alClient;
			ISB.ZoomMode := zmFullPage;
			ISB.DragMode := dmAutomatic;
			ISB.MouseMode := mmuser;
			ISB.OnImageClick := ISBClick;
			ISB.OnImageMouseMove := ISBMouseMove;
			ISB.PopupMenu := PopupMenu6;
			ISB.OnImageMouseDown := ISBImageMouseDown;
			ISB.OnImageMouseUp := ISBImageMouseUp;
			//ISB.OnStartDrag := ISBStartDrag;
			ISB.OnEndDrag := ISBEndDrag;
			// ISB.OnImageDragDrop := ISBDragDrop;
			// ISB.OnImageDragOver := ISBDragOver;
			ISB.OnDragDrop := ISBDragDrop;
			ISB.OnDragOver := ISBDragOver;

			if FindComponent('M_Pl'+inttostr(i))=nil then
			begin
			Panel := TPanel.Create(Self);
			Panel.Name := 'M_Pl'+inttostr(i);//FormatDateTime('yyyymmddhhnnsszzz', now)
			Panel.Left := 4;
			Panel.Top := (i-1)H+(6i);
			Panel.Height := H;
			Panel.Width := W;
			Panel.Parent := ScrollBox1;
			Panel.Caption :='';

			if FindComponent(ISBName+inttostr(i))=nil then
			begin
			ISB := TImageScrollBox.Create(Self);
			ISB.Name := ISBName+inttostr(i);
			ISB.Parent := Panel;
			ISB.Align := alClient;
			ISB.ZoomMode := zmFullPage;
			ISB.DragMode := dmAutomatic;
			ISB.MouseMode := mmuser;
			ISB.OnImageClick := ISBClick;
			ISB.OnImageMouseMove := ISBMouseMove;
			ISB.PopupMenu := PopupMenu6;
			ISB.OnImageMouseDown := ISBImageMouseDown;
			ISB.OnImageMouseUp := ISBImageMouseUp;
			ISB.OnEndDrag := ISBEndDrag;
			ISB.OnDragDrop := ISBDragDrop;
			ISB.OnDragOver := ISBDragOver;
			end;
			end;

			end;

			end;
			@@ -12022,25 +12864,29 @@
			var
			i : Integer;
			begin
			try
			For i:= ComponentCount -1 downto 0 do
			begin
			IF Components[i] is TImageScrollBox Then
			IF (Components[i] is TImageScrollBox) and (Components[i]<>nil) Then
			begin
			IF Pos(ISBName,Components[i].Name) > 0 Then
			Components[i].Free;
			end
			Else If Components[i] is TPanel Then
			Else If (Components[i] is TPanel) and (Components[i]<>nil) Then
			begin
			IF Pos('M_Pl',Components[i].Name) > 0 Then
			Components[i].Free;
			end
			Else If Components[i] is TShape Then
			Else If (Components[i] is TShape) and (Components[i]<>nil) Then
			begin
			IF Pos('SP',Components[i].Name) > 0 Then
			Components[i].Free;
			end;
			end;
			Application.ProcessMessages;
			except on E: Exception do
			end;

			//showmessage(inttostr(Count));
			end;

			@@ -12187,6 +13033,9 @@
			ln := length(SelectISB.Name);
			SelectPage := Strtoint(Copy(SelectISB.Name,v+1,ln-v));
			ISB1.ZoomMode := zmFittoPage;
			//ShowMessage('SelectISB.FileName='+SelectISB.FileName);
			//if SelectISB.FileName='' then exit;

			ISB1.LoadFromFile(SelectISB.FileName,1);
			if (ISB1.Graphic.ImageFormat <> ifBlackWhite) and (SmoothCB.Checked)then
			Image_Smooth(ISB1.Graphic);
			@@ -12197,7 +13046,7 @@
			Procedure TCB_IMGPSScanX.ISBMouseMove(Sender: TObject; Shift: TShiftState;
			X, Y: Integer);
			begin
			Edit1.SetFocus;
			//Edit1.SetFocus;
			if Draging then
			begin
			if not (TShape(FindComponent('SP'+Copy(TImageScrollBox(Sender).Name,length(ISBName)+1,length(TImageScrollBox(Sender).Name)-length(ISBName)))) = nil) then
			@@ -12903,6 +13752,7 @@
			OldName := Filelist.Strings[i];
			//NewName := Add_Zoo(i+1,3)+Copy(OldName,4,length(OldName)-3);
			NewName := Add_Zoo(i+1,3)+FileName2NoQuene_Filename(OldName);
			//ShowMessage(OldName+#10#13+NewName);
			ReNameFile(Path+OldName,Path+NewName);
			Filelist.Strings[i] := NewName;
			end;
			@@ -13104,7 +13954,7 @@
			//ShowMessage(Memo1.Lines.Text);
			IF memo1.Lines.Strings[0] <> '0' Then
			begin
			HttpErrStr := _Msg('錯誤原因:')+memo1.Lines.Strings[1];
			HttpErrStr := _Msg('')+memo1.Lines.Strings[1]+'。';
			Result := -1;
			Exit;
			end
			@@ -13112,7 +13962,7 @@
			begin
			if (memo1.Lines.Count < 2) then
			begin
			HttpErrStr := _Msg('錯誤原因:')+'OCX:Index Count error';
			HttpErrStr := _Msg('')+'OCX:Index Count error';
			Result := -1;
			Exit;
			end
			@@ -13126,7 +13976,7 @@
			Result := 1
			Else
			begin
			HttpErrStr := _Msg('錯誤原因:')+'OCX:Value error';
			HttpErrStr := _Msg('')+'OCX:Value error';
			Result := -1;
			Exit;
			end;
			@@ -13369,12 +14219,16 @@
			i: Integer;
			begin
			Timer1.Enabled := False;

			//FIs_In_Wh:='Y'; /// test 記得關掉
			//FWH_category :='N'; // test 記得關掉
			// FImgDelete := 'Y'; //test 記得關掉
			//Showmessage('a');
			//self.FIs_OldCase := 'Y';
			PageLVclear := True;
			InitialOk := False;

			FMaxUploadSize:='10';
			FJpgCompression:=50;
			//FMode := 'DSCAN' ;
			//FIs_In_Wh := 'Y';
			if FIs_In_Wh = 'Y' then
			@@ -13481,6 +14335,7 @@
			LastAddFormidList := TStringList.Create;
			SampleFormIDList := TStringList.Create;//20170627 加入
			ExistImgList := TStringList.Create; //20170724 新增
			reSizeExistImgList :=TStringList.Create; //20171012 新增
			//******清單區******

			ShowText := _Msg('資料載入中,請稍候');
			@@ -13599,7 +14454,11 @@
			Del_Sub_NothingPath(ImagePath); //清掉案件目錄是空的


			LogFile1.LogFile:=LngPath+'IMGPSCheck.log';

			ReduceLogFile;

			LogFile1.LogToFile(logTimeString+'OCX取表data結束');

			ShowText := _Msg('資料載入中,請稍候');
			DataLoading(True,True);
			@@ -13639,7 +14498,7 @@
			MkDir(ImageSavePath+FCaseID);
			CreateEmptyCase(ImageSavePath,FCaseID);
			MkDir(ImageSavePath+FCaseID+'\Download');
			IF (FMode = 'ESCAN') then //異動件先下載影像
			IF (FMode = 'ESCAN') or (FMode = 'DSCAN') then //異動件先下載影像
			begin
			ShowText := _Msg('案件下載中,請稍候');
			DataLoading(True,True);
			@@ -13671,7 +14530,8 @@
			// //LoadImgFile;
			// end;
			Create_Cust_DocDir(FCaseID); //產生外面傳入的文件
			LastInitFormidListCreate(ImageSavePath+FCaseID+'\Download\');
			if FMode='ESCAN' then
			LastInitFormidListCreate(ImageSavePath+FCaseID+'\Download\');
			end;
			end;

			@@ -13702,6 +14562,8 @@
			//ShowMessage(IntToStr(ScanDpi));
			R_W_Scanini('R'); //掃瞄設定的ini
			//ShowMessage(IntToStr(ScanDpi));
			//ShowMessage('停掉DataLoading');
			//DataLoading(False,False);
			ScanDuplexCB.Checked := ScanDuplex;
			if FMode <> 'SAMPLESCAN' then
			LoadImgFile;
			@@ -13721,6 +14583,40 @@
			Splitter2.Visible := False; }
			//ShowMessage('ImageSavePath='+ImageSavePath);
			DataLoading(False,False);

			LogFile1.LogToFile(logTimeString+'OCX初始化結束');
			LogFile1.LogToFile(logTimeString+'FUrl='+FUrl+
			',FCaseID='+FCaseID+
			',FMode='+FMode+
			',FModeName='+FModeName+
			',FWork_no='+FWork_no+
			',FUserID='+FUserID+
			',FUserName='+FUserName+
			',FUserUnit='+FUserUnit+
			',FData='+FData+
			',FVerify='+FVerify+
			',FReWrite='+FReWrite+
			',FLanguage='+FLanguage+
			',FLoanDoc_Value='+FLoanDoc_Value+
			',FLoanDoc_Enable='+FLoanDoc_Enable+
			',FUseProxy='+FUseProxy+
			',FC_DocNoList='+FC_DocNoList+
			',FC_DocNameList='+FC_DocNameList+
			',FFixFileList='+FFixFileList+
			',FIs_In_Wh='+FIs_In_Wh+
			',FOldCaseInfo='+FOldCaseInfo+
			',FPrintyn='+FPrintyn+
			',FIs_OldCase='+FIs_OldCase+
			',FCustDocYN='+FCustDocYN);
			LogFile1.LogToFile(logTimeString+'FImgDPI='+IntToStr(FImgDPI)+
			',FScanColor='+ IntToStr(FScanColor)+
			',FFileSizeLimit='+ IntToStr(FFileSizeLimit)+
			',FCaseNoLength='+ IntToStr(FCaseNoLength)+
			',FImgDelete='+FImgDelete+
			',FIsExternal='+FIsExternal+
			',FWH_category='+FWH_category+
			',FCheck_main_form='+FCheck_main_form+
			',FMaxUploadSize='+FMaxUploadSize);

			end;

			@@ -13744,6 +14640,7 @@
			AreaStr : String;
			S : TStringlist;
			CheckStr : String;
			uploadMsg:String;//20171122 新增配合不同mode下要秀不能上傳訊息
			begin
			IF not InitialOk Then
			begin
			@@ -13755,12 +14652,20 @@
			DisplayPath := '';
			ClearCaseIndex;
			RejectCase := False;

			uploadMsg:='';
			if not CheckCaseID_OK then //檢查是否有未配號的案件
			begin
			Showmessage(_Msg('尚有未配號案件,無法上傳'));
			Showmessage(_Msg('尚有「無案件編號」之案件，無法上傳'));
			Exit;
			end;

			if not CheckCaseAttach_OK then //20170911檢查是否有未歸類的案件
			begin
			Showmessage(_Msg('尚有未歸類文件,無法上傳'));
			Exit;
			end;


			if NewTreeNode.Count = 0 then
			begin
			Showmessage(_Msg('無影像需傳送'));
			@@ -13816,7 +14721,7 @@
			end;
			if CaseTrans = -1 then //失敗
			begin
			Showmessage(_Msg('詢問案件可否傳送時,網路發生錯誤!!')+HttpErrStr);
			Showmessage(_Msg('')+HttpErrStr+'.');
			DataLoading(False,False);
			LoadImgFile;
			Exit;
			@@ -13858,7 +14763,6 @@
			///////檢核//////
			ShowText := CaseID+_Msg('資料上傳中,請稍候');
			DataLoading(True,True);
			//ShowMessage('NNNNN');
			//ShowMessage('退出');DataLoading(False,False);Exit;
			If Not TransCaseID(TransPath,CaseID,True) Then //傳送案件
			begin
			@@ -13870,13 +14774,30 @@
			end;
			end;
			DataLoading(False,False);
			TransMsg := Format(_Msg('成功件%d件'),[SuccessCount]);
			TransMsg := Format(_Msg('成功件【%d】件'),[SuccessCount]);
			if ReCasecount > 0 then
			TransMsg := TransMsg + #13#10 + Format(_Msg('無法上傳件%d件'),[ReCasecount]);
			TransMsg := TransMsg + #13#10 + Format(_Msg('無法上傳件【%d】件'),[ReCasecount]);
			if CheckErrCount > 0 then
			TransMsg := TransMsg + #13#10 + Format(_Msg('檢核失敗件%d件'),[CheckErrCount]);
			TransMsg := TransMsg + #13#10 + Format(_Msg('檢核失敗件【%d】件，請先點選「案件編號」，再點選「問號」查看錯誤原因'),[CheckErrCount]);

			Showmessage(_Msg('傳送完成')+#13#10+TransMsg);

			if (FMode = 'DSCAN') and (SuccessCount = 1) then
			begin
			uploadMsg:=NowCaseNo+_Msg('影像上傳完成。此案已進入下一流程');
			end;
			if (FMode='ESCAN') and (FModeName='補件掃描') and (SuccessCount = 1) then
			begin
			uploadMsg:=NowCaseNo+_Msg('影像已補件完成');
			end;
			//ShowMessage('uploadMsg='+uploadMsg);
			if uploadMsg<>'' then
			begin
			ShowMessage(uploadMsg);
			end
			else
			begin
			Showmessage(_Msg('傳送完成')+#13#10+TransMsg);
			end;

			LoadImgFile;
			if (FMode = 'ESCAN') and (SuccessCount = 1) then
			@@ -13911,7 +14832,6 @@
			NowDocNo := '';
			NowFormCode := '';
			NowFormName := '';

			NowPage := 0;
			NowShowFileList.Clear;
			StatusBar1.Panels[2].Text := '';
			@@ -14331,13 +15251,26 @@
			procedure TCB_IMGPSScanX.TreeView1KeyUp(Sender: TObject; var Key: Word;
			Shift: TShiftState);
			begin
			TreeView1Click(nil);
			IF TreeView1.Selected.Parent <> nil Then
			begin
			TreeView1Click(nil);
			end
			else
			begin
			ClearView(1);
			end;

			end;

			procedure TCB_IMGPSScanX.TreeView1MouseEnter(Sender: TObject);
			begin
			TreeView1.SetFocus;
			end;

			procedure TCB_IMGPSScanX.TreeView1MouseMove(Sender: TObject; Shift: TShiftState;
			X, Y: Integer);
			begin
			TreeView1.SetFocus;
			//TreeView1.SetFocus;
			{UnRegisterHotKey(Handle, HotKeyId1);
			UnRegisterHotKey(Handle, HotKeyId2); }
			end;
			@@ -14645,6 +15578,7 @@
			procedure TCB_IMGPSScanX.Set_filesizelimit(const Value: WideString);
			begin
			//ShowMessage(Value);
			FFileSizeLimit:=0;
			if Value ='' then
			begin
			FFileSizeLimit := 5*1024;
			@@ -14727,6 +15661,16 @@
			FIsExternal:=Value;
			end;

			function TCB_IMGPSScanX.Get_WH_CATEGORY: WideString;
			begin

			end;

			procedure TCB_IMGPSScanX.Set_WH_CATEGORY(const Value: WideString);
			begin
			FWH_category:=Value;
			end;

			initialization
			TActiveFormFactory.Create(
			ComServer,